Contribute
Register

Ersterhernd's G4 Cube Project

Joined
Feb 8, 2010
Messages
31
Motherboard
GA-Z77X-UP5 TH
CPU
I7-3770K-16GB Ram
Graphics
HD 4000
Mac
MacBook Air
Classic Mac
Mobile Phone
iOS
Thanks for the replies. I will post some pics but there about the same as this project except I did replace DVD drive with one that was mentioned in one of the threads. I had to cut the case of the original drive housing to get it to fit. The bottom fan also had to have its corner cut more to accommodate the DVD. I tried it and it works. I will have to retest after the top cube is in position.

I have ordered an amp(Ebay)(Sonic) as you suggested for the speakers.

I am still trying to contact Edisen via emails. On their web I try to put sensor in my cart and it keeps kicking out an error message?

I will start a new thread with some pics soon.

Thanks
Dennis
 
Joined
Dec 15, 2011
Messages
905
Motherboard
Z68MX-UD2H-B3, DQ77KB, NUC DC53427HYE, NUC D54250WYKH
CPU
i5-2500K, i3-3225, i7-3770S
Graphics
HD 3000, HD 4000, HD 5000
Mac
Classic Mac
iMac, Power Mac
Mobile Phone
iOS
I will start a new thread with some pics soon.

Thanks
Dennis
Yes, we want to see pics! :ugeek:
 
Joined
Mar 6, 2016
Messages
1
Motherboard
DQ77KB
CPU
i3-3225
Mac
iMac, MacBook, MacBook Pro
Classic Mac
Classic, Performa
Mobile Phone
iOS
What header did you use to connect the case fans to? I have installed the Foxconn DC Brushless PVA080F12H" (80x80x20mm, 4Pin, 12V, 0.36A) to fit in the original fan support on the backplate. I have it connected to the System fan header, but it will not show up in BIOS, or HWMonitor. I am unable to get it to spin up, not sure if it is a bad fan, or I am missing a step. Any suggestions?
 
Joined
Jun 13, 2017
Messages
295
Motherboard
Dell 9020-Q87
CPU
i5-4690K
Graphics
HD 4600
Mac
iMac, MacBook Pro, Mac mini
Classic Mac
Power Mac
Mobile Phone
iOS
@ersterhernd Thanks for posting about your really good G4 Cube mod, great thread and nice photos. I've started thinking about my next mod one the G5 is finished, and I really want to try the G4 Cube. I haven't purchased my Cube yet, I'm looking and checking the perspex covers, I'm in nor rush!. I noted that you recommended the Intel DQ77MK motherboard, I have been reading up on this board and wondered if it's still a good!.
 
Top