Error loading operating system Gigabyte Z370N WIFI, PNY 32GB USB 3.0

[YYxxYY]

I've tried many different USBs, different ports, even using a Memory Stick with a card reader plugged into a USB port, but I always end up with an error similar to "Error loading operating system" when trying to start the installation with the UniBeast-created USB. I have also recreated the USB with UniBeast a couple different times on different machines. I've made the recommended BIOS updates and settings, but still no change.

It is clear that the boat recognizes the USB, but it just will not boot from it. Any ideas? Thanks!

 

[MaxMuszer]

I had the same problem, but I solved it ...

Maybe this could help you: My mistake was that I formatted my USB drive as a master boot record. Formatting the USB drive as a GUID did not display an error message and the system was started.

Here are some other solutions:
https://www.tonymacx86.com/threads/unibeast-8-troubleshooting-notes.235489/

 

[YYxxYY]

I had the same problem, but I solved it ...

Maybe this could help you: My mistake was that I formatted my USB drive as a master boot record. Formatting the USB drive as a GUID did not display an error message and the system was started.

Here are some other solutions:
https://www.tonymacx86.com/threads/unibeast-8-troubleshooting-notes.235489/

Thanks. I was actually able to come to this same resolution earlier. Unfortunately, the install was completed and I ran Multibeast but then ran into graphics issues when booting from the Mojave installation. Never was able to get it fixed, so I gave up.