[ERROR] Can`t boot to installer error: "** In memory panic Stackshot Succeded ** bytes traced 3694 (Uncompressed 8128) **"

[KK10KK10]

I tried to install mac os big sur but i got an error:"** In memory panic Stackshot Succeded ** bytes traced 3694 (Uncompressed 8128) **"
I tried clover and OpenCore but none of them worked.

Laptop Specs:

name:Asus Vivobook X515JA
ram: 16GB
uefi: enabled
disk1:512 GB SSD
disk2: 1T HDD
cpu: intel core i5 10th gen

 

[Feartech]

I tried to install mac os big sur but i got an error:"** In memory panic Stackshot Succeded ** bytes traced 3694 (Uncompressed 8128) **"
I tried clover and OpenCore but none of them worked.

Laptop Specs:

name:Asus Vivobook X515JA
ram: 16GB
uefi: enabled
disk1:512 GB SSD
disk2: 1T HDD
cpu: intel core i5 10th gen

setup catalina first:

[Guide] Booting The USB Installer Using OpenCore

A guide in setting up your USB installer using OpenCore. You must have either a built-in ethernet or compatible Broadcom Wifi in your laptop for this guide to work. Built-in Intel Wifi can also work if set correctly...

www.tonymacx86.com

 

[KK10KK10]

setup catalina first:

[Guide] Booting The USB Installer Using OpenCore

A guide in setting up your USB installer using OpenCore. You must have either a built-in ethernet or compatible Broadcom Wifi in your laptop for this guide to work. Built-in Intel Wifi can also work if set correctly...

www.tonymacx86.com

I did that tutorial but now i faced another problem:" Failed to bootstrap path: path = ...

 

[Feartech]

I did that tutorial but now i faced another problem:" Failed to bootstrap path: path = ...

you will need to upload your zipped OC folder, boot verbose and take a pic to upload here where it stops

 

[KK10KK10]

Here
When i try to reboot it stays at IOConsoleUsers: gIOScreenLockstate 3, hs 0, bs 0, now 0, sm 0x0 and after 5 minutes it starts to spam "Falied to bootstrap path= ...

 

[Feartech]

Here
When i try to reboot it stays at IOConsoleUsers: gIOScreenLockstate 3, hs 0, bs 0, now 0, sm 0x0 and after 5 minutes it starts to spam "Falied to bootstrap path= ...

it is a graphics issue

you need to check over this section:

and you need to make the needed changes from post 2 as currently it is setup for a skylake system

 

[KK10KK10]

I made some changes but it didn`t help.

 

[KK10KK10]

Right now it look like that, do i need to change something?

 

[Feartech]

View attachment 541335Right now it look like that, do i need to change something?

the model is wrong..

also check bios settings are correct, set DVMT to 64MB or 128MB

 

[KK10KK10]

I tried finding what graphics i have, but everyware it says just: "Intel uhd graphics"