- Joined
- Mar 20, 2020
- Messages
- 12
- Motherboard
- Gigabyte Z370P D3
- CPU
- i7-8700
- Graphics
- RX 5700 XT
- Mobile Phone
Hello all,
I'm trying to install Catalina on a friend's PC on a separate second drive from the Win10 one.
Using Unibeast 10.3.0 with Clover r5119, following Tonymac's Catalina guide. Using UEFI boot mode, Disabled VT-d, Secure Boot Mode, Serial Port, Enabled XHCI.
The PC is a Fujitsu Esprimo E710:
- MoBo Fujitsu D3161-A1 (latest AMI BIOS V4.6.5.3 R1.23.0 with UEFI boot)
- Intel Core i5 3470
- Integrated graphics (HD2500)
- 8GB (4x2GB) DDR3.
- Kingston SATA SSD (Win10), WD 2.5'' SATA HDD (Catalina)
When I try to boot in Verbose mode (-v -x), after just few lines the error in the image pops up.
EFI folder (in attach) is the untouched one generated from Unibeast.
How can I solve this?
Thanks in advance.
I'm trying to install Catalina on a friend's PC on a separate second drive from the Win10 one.
Using Unibeast 10.3.0 with Clover r5119, following Tonymac's Catalina guide. Using UEFI boot mode, Disabled VT-d, Secure Boot Mode, Serial Port, Enabled XHCI.
The PC is a Fujitsu Esprimo E710:
- MoBo Fujitsu D3161-A1 (latest AMI BIOS V4.6.5.3 R1.23.0 with UEFI boot)
- Intel Core i5 3470
- Integrated graphics (HD2500)
- 8GB (4x2GB) DDR3.
- Kingston SATA SSD (Win10), WD 2.5'' SATA HDD (Catalina)
When I try to boot in Verbose mode (-v -x), after just few lines the error in the image pops up.
EFI folder (in attach) is the untouched one generated from Unibeast.
How can I solve this?
Thanks in advance.
Attachments
Last edited: