erik's "Tiny But Mighty" HTPC: ASRock Z370M-ITX/ac - i5-8400 - UHD 630 Graphics - High Sierra

[AppleiPad556]

As for me. I have everything working and stable except for graphics acceleration. For the love of #$%@, I cannot get graphics acceleration to work.

I had SO much trouble with graphics acceleration.
Try using ig-platform-id 0x3E920000 (I used this with HDMI) and 0x3E9B0007 (I'm using rn with DP).
I think I attached my EFI recently in the thread, you could try using my graphics settings in it.
Good luck!

 

[mizznfizz]

I had SO much trouble with graphics acceleration.
Try using ig-platform-id 0x3E920000 (I used this with HDMI) and 0x3E9B0007 (I'm using rn with DP).
I think I attached my EFI recently in the thread, you could try using my graphics settings in it.
Good luck!

So are you using any other injections than that? I have placed that information previously in clover settings, added the device information to Properties and then added the platform and device IDs in graphics but still had not acceleration.

 

[AppleiPad556]

So are you using any other injections than that? I have placed that information previously in clover settings, added the device information to Properties and then added the platform and device IDs in graphics but still had not acceleration.

I am using other injections inside of my config.plist, however it's all a jumbled mess, and I'm not sure which injections are actually making the graphics work. Try these out, however:
Boot>Arguments>-disablegfxfirmware
(NOTHING IN DEVICES>FAKE ID>INTELGFX)
Devices>Add Properties> Device: IntelGFX; Disabled: NO; Key: APPL,GfxYTile; Value: 0AAAAA00
Graphics>Inject Intel

and that's all I can find in my config. I do not believe that I have any external injections.

I have attached my EFI. If you have a backup ready you could maybe try booting with it, however I think it's best to look at the settings and see if you can make something work.

Good luck!

 

[Stork]

@mizznfizz,
Since we're not telepathic, we need to know your system components. See the tonymacx86 Forum Rules & Policies on signature block components.

Additionally, please provide complete details in your Profile.

Mobo: motherboard manufacturer/model
CPU: detailed CPU model (e.g., i7-4770K)
Graphics: Video card manufacturer/model and/or Intel Integrated Graphics version (e.g., HD4600)

See my Profile items to the left of my post, under my name.

By completing your Profile and signature block, you help us help you better.

 

[mizznfizz]

@mizznfizz,
Since we're not telepathic, we need to know your system components. See the tonymacx86 Forum Rules & Policies on signature block components.

Additionally, please provide complete details in your Profile.

Mobo: motherboard manufacturer/model
CPU: detailed CPU model (e.g., i7-4770K)
Graphics: Video card manufacturer/model and/or Intel Integrated Graphics version (e.g., HD4600)

See my Profile items to the left of my post, under my name.

By completing your Profile and signature block, you help us help you better.

Sorry hadn't been getting much traction on this thread up until about this week so had somewhat given up on forum responses.
Setup is pretty much exact same as Eriks
ASRock Z370m-itx
i5 8400
UHD 630 integrated graphics
swapped over to Broadcom 2z chip for WiFi/BT

However, I was able to get everything but the integrated graphics working up until last night. On the other major forum another user posted he was able to get my almost exact same setup working with a users clover folder from here. Grabbed that this morning and dropped the clover folder in and bam everything is working now. Looks like my biggest mistake was that when I was attempting to do the framebuffer patching I was only adding the minimum stuff in for the ig-platform-id and device id (meaning the framebuffer patch enable stuff) and the one I am now using has all the pipe information and everything for both the ig-platform as well as the device-id.

 

[AppleiPad556]

Sorry hadn't been getting much traction on this thread up until about this week so had somewhat given up on forum responses.
Setup is pretty much exact same as Eriks
ASRock Z370m-itx
i5 8400
UHD 630 integrated graphics
swapped over to Broadcom 2z chip for WiFi/BT

However, I was able to get everything but the integrated graphics working up until last night. On the other major forum another user posted he was able to get my almost exact same setup working with a users clover folder from here. Grabbed that this morning and dropped the clover folder in and bam everything is working now. Looks like my biggest mistake was that when I was attempting to do the framebuffer patching I was only adding the minimum stuff in for the ig-platform-id and device id (meaning the framebuffer patch enable stuff) and the one I am now using has all the pipe information and everything for both the ig-platform as well as the device-id.

Do you mind attaching that EFI folder? I don't know how well I configured my graphics

 

[mizznfizz]

Do you mind attaching that EFI folder? I don't know how well I configured my graphics

Yup will do tonight when I am home from work. It is setup for an H370 Gigabyte board but aside from having to go through and re-enable all my other USB ports and do the cleanup with hackintool everything else works perfectly from what I have seen.

 

[mizznfizz]

@AppleiPad556 here is the link. I found it while looking at my thread on the other forum.
https://www.tonymacx86.com/threads/success-gigabyte-h370m-ds3h-i5-8400-mojave-10-4-2.267428/

I literally just took his entire clover folder and replaced mine. Everything is working for me, bluetooth, wifi, ethernet, even has sound with notes as to what color each input is! Only thing that did not work straight out was all of my other USB ports (mouse and keyboard were plugged in at that time). So I have to go through Hackintool to create the USBPorts.kext file to map all my USB ports.

 

[saroxx]

Hello @AppleiPad556 i have your own hardware, I tried to use your clover folder but strangely the usb do not work, after copying your clover I just entered smbios 18.1.

 

[mizznfizz]

Hello @AppleiPad556 i have your own hardware, I tried to use your clover folder but strangely the usb do not work, after copying your clover I just entered smbios 18.1.

I had the same problem when I downloaded the above linked clover folder. You will need to use Hackintool to clear out and reset your USB ports. I believe the clover folder already has USBInjectAll.kext in there so once you clear the ports with Hackintool you should have all discoverable (will need to restart after you clear the ports).