Enabling Bluetooth for P8P67 * boards and BT-211

[drcrack]

I dont know how to install firmware on windows tried with run with terminal cmd cant install does files with it. Must be doing something wrong can anyone help me`? I have windows 7 64 bit

This firmware uploader is not intended for windows, there's no way to use it under windows. You can use official drivers provided by your hardware vendor.

 

[Lyyk]

Installed the drivers but it cant find any device :S whats the prob then?

 

[blueking]

That's a windows problem, not a hackintosh one. If you are having trouble with windows, I would try somewhere else.

 

[FishCow]

Just wanted to chime in and say thanks to ajg0r for his V2 firmware uploader.
I only have an Apple Magic Mouse to test it with - but it works flawlessly on deluxe board running 10.7.2
Regards
Fish

That was until I tried using a trackpad with 3 finger gestures.
Instant freeze
Sorry for misinformation

 

[buoo]

Hi guys!

The firmware works good to me, but I can't set the bluetooth off.
Could you help me please?

Screen shot 2011-10-25 at 13.52.21.png

This happens for my P8Z68 Deluxe and for my AT5IONT-I Deluxe too.

 

[drcrack]

Hi guys!

The firmware works good to me, but I can't set the bluetooth off.
Could you help me please?

This happens for my P8Z68 Deluxe and for my AT5IONT-I Deluxe too.

You can only turn it off from BIOS, or uninstall the fix and cold-reboot.

 

[buoo]

Hi guys!

The firmware works good to me, but I can't set the bluetooth off.
Could you help me please?

This happens for my P8Z68 Deluxe and for my AT5IONT-I Deluxe too.

You can only turn it off from BIOS, or uninstall the fix and cold-reboot.

Is there the possibility to patch it? Why does it work for you?

 

[drcrack]

Hi guys!

The firmware works good to me, but I can't set the bluetooth off.
Could you help me please?

This happens for my P8Z68 Deluxe and for my AT5IONT-I Deluxe too.

You can only turn it off from BIOS, or uninstall the fix and cold-reboot.

Is there the possibility to patch it? Why does it work for you?

No, i don't know how to do that. And no, I can't disable it either in my setup.

 

[Nacht]

i have a BT211 and i finally got it to work not sure why i was having so much trouble. most likely because i am using a EFI partition. currently i am using v2 but i don't see any differences in v1 neither solve my issue.

first off i tested my phone and it was fine
i will test a magic mouse tomorrow
i can not get sleep to work but its not working on my system even before i added in my BT


4 things that i need to get fixed
1: greyed out discoverable in the menu bar
2: greyed out "allow computer to wake"
3: greyed out on/off
4: move extra folder to EFI partition (or install entire load routine on the EFI either way will work)

is there a Kext/DSDT or edit that can be done to enable functionality?

it seems like its so close to being right but just needs a small tweak somewhere

i noticed my device was showing up as an apple device unknown

Apple Bluetooth Software Version:	4.0.1f4
  Hardware Settings:
  Address:	00-02-72-b1-62-98
  Manufacturer:	Unknown
  Name:	Mac Pro
  Firmware Version:	5.39321 (5.39321)
  Bluetooth Power:	On
  Discoverable:	No
  Vendor ID:	0
  Product ID:	0x7fff
  HCI Version:	5 (0x5)
  HCI Revision:	39321 (0x9999)
  LMP Version:	5 (0x5)
  LMP Subversion:	39321 (0x9999)
  Device Type (Major):	Computer
  Device Type (Complete):	Mac Desktop
  Composite Class Of Device:	3801348 (0x3a0104)
  Device Class (Major):	1 (0x1)
  Device Class (Minor):	1 (0x1)
  Service Class:	464 (0x1d0)
  Services:
  Bluetooth File Transfer:
  Folder other devices can browse:	~/Public
  Requires Authentication:	Yes
  State:	Enabled
  Bluetooth File Exchange:
  Folder for accepted items:	~/Downloads
  Requires Authentication:	No
  When other items are accepted:	Ask
  When PIM items are accepted:	Ask
  When receiving items:	Prompt for each file
  State:	Enabled
  Incoming Serial Ports:
  Bluetooth-PDA-Sync:
  RFCOMM Channel:	3
  Requires Authentication:	No
  Outgoing Serial Ports:
  Bluetooth-Modem:
  Address:	
  RFCOMM Channel:	0
  Requires Authentication:	No

any help to finish this would be great

 

[HoochShepherd]

So I originally bought the rocketfish usb bluetooth to get bluetooth going.. And I lost it.. Apparently thats all for the best anyway as now in 7.2 my on board seems to work like money. Just thought I'd throw that out there.