El Capitan Install problems with Acer Aspire V3-771G

[osadchi]

The full mark is Acer Aspire V3-771G-33124G50Makk (nx.m6qer.001);


System: Acer Aspire V3 771G
Main Operating System: Windows 10 64-Bit
CPU: Intel Core i3 3120M ; Ivy Bridge

Motherboard: Acer VA70_HC
Chipset: Intel Ivy Bridge 09
BIOS: Insyde Corp V2.28

Graphics: Nvidia GeForce 710M @2gb
Internal: Intel HD 4000
Generic PnP Monitor 1600x900 @60Hz
4gb Dual DDR3 Ram

I tried using the Card Id and whatever...
But everytime have the issue or reboot...

I've created USB with VMware Mac OS 10.8, I download original app from the store and write with last UniBeast from here.


My problem is reboot after half loading on pre-instal screen.
If I'd use some keys like -v -f IGPlatformID=01660004 PCIRootUID=1
I had something like on screens below.

 

[RehabMan]

Follow the Clover guide linked from the FAQ.

http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

 

[osadchi]

Thanks a lot, it works)

But, after reboot keyboard, touchpad and the sound not works.

I tried that (https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller) already, but it's not helping (((

USB keyboard, mouse and the 3g modem works fine.

P.S. Bluetooth shows enable, but don't see the IPhone.

 

[osadchi]

When I installed VoodooPS2 kext I got some message, that says "kext was installed improperly"

 

[VioletDragon]

When I installed VoodooPS2 kext I got some message, that says "kext was installed improperly"

How have you installed it?

 

[osadchi]

With Easykext Utility, just drag and drop) And put "Daemon" where github says

 

[VioletDragon]

With Easykext Utility, just drag and drop) And put "Daemon" where github says

Follow this. https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller/wiki/How-to-Install

 

[osadchi]

Yes, right this instructions from the github I was following

 

[VioletDragon]

Yes, right this instructions from the github I was following

Remove from S/L/E. Put it in EFI/Clover/kexts/10.11. Use Kext Utility to install VoodooPS2.kext to S/L/E.

 

[osadchi]

Thanks you so much)))

I just drop VoodooPS2, VoodooHD and Generic... To the EFI/kext/10.11 and reinstall it with the Utility.

Now sound and laptop's keyboard and touchpad works fine) And horror microphone))

Now have only 2 problems - WIFI and Display - it show some white lines, when I moving some windows or scroll web pages.