Contribute
Register

Dual GPU: RX 580 - Can't get past boot screen

Status
Not open for further replies.
Joined
Dec 27, 2016
Messages
5
Motherboard
Asus Z170 Pro Gaming/Aura
CPU
i7-6700k
Graphics
Gigabyte RX 580 8gb Gaming x 2
Hi there,

I'm hoping someone can help me out since I'm stumped and don't even know where to start.

I recently installed a second Gigabyte RX 580 8gb gaming into my system (multiboot for mining while away from computer). With the second card, I can't seem to get past the boot screen. I've tried booting up with my DVI cable plugged into either GPU as well as the MOBO and still no luck. I have tried running (and re-running) AMD helper with multibeast, but that didn't seem to do anything.

Can someone provide me with guidance on how to troubleshoot this (or what additional information you need)? Cards seem to work on Windows and EthOS.

Thanks!
 
Hi, same problem on 10.12.6 for me. BTW rx580 + r9-280 works (or even with 2x 280 cards). Tried each rx580 card apart and they work... but not together. I'm going to upgrade to High Sierra on a clone disk to give a try.
Thanks

I installed High Sierra and it now they rock !!!

10.3.2 + fcpx 10.3.4 :
BruceX test :
Sierra + 1x rx580 : 19sec
High Sierra + 2x rx580 : 12sec

Cinebench OpenGL : now 129k
Luxmark : 30k (15k with single rx580)

What about FCPX perfs ? Do you think they're good ?

thank you
 

Attachments

  • Capture d’écran 2018-01-11 à 17.45.41.png
    Capture d’écran 2018-01-11 à 17.45.41.png
    818.2 KB · Views: 273
  • Capture d’écran 2018-01-11 à 18.45.36.png
    Capture d’écran 2018-01-11 à 18.45.36.png
    681.4 KB · Views: 268
Last edited:
Hi, same problem on 10.12.6 for me. BTW rx580 + r9-280 works (or even with 2x 280 cards). Tried each rx580 card apart and they work... but not together. I'm going to upgrade to High Sierra on a clone disk to give a try.
Thanks

I installed High Sierra and it now they rock !!!

10.3.2 + fcpx 10.3.4 :
BruceX test :
Sierra + 1x rx580 : 19sec
High Sierra + 2x rx580 : 12sec

Cinebench OpenGL : now 129k
Luxmark : 30k (15k with single rx580)

What about FCPX perfs ? Do you think they're good ?

thank you

hello friend, i have that same problem can't boot into OS X ( high sierra )with 2x 580, all was good with 2x 280

im truying reinstalling high sierra

Do you use wahtevergreen.kext and lilu.kext ?
 
hello friend, i have that same problem can't boot into OS X ( high sierra )with 2x 580, all was good with 2x 280

im truying reinstalling high sierra

Do you use wahtevergreen.kext and lilu.kext ?
Hi Rackham,
with 1 or 2 rx580 I do use Whatevergreen and Lilu kexts (& high sierra for dual rx580setup)

best regards
 
hello friend, i have that same problem can't boot into OS X ( high sierra )with 2x 580, all was good with 2x 280

im truying reinstalling high sierra

Do you use wahtevergreen.kext and lilu.kext ?

Hi Have you solved this?
I also have a 4930k, X79-UP4 and 1 x 580, installed the second one and can't boot
 
Status
Not open for further replies.
Back
Top