DSDT patching issues with Lenovo T410

[RehabMan]

sorry to bring back to life this old thread! i have a T410i (only intel gpu) can´t get full qe/ci working properly, cause when it boots up the screen is distorted! could anyone bring me the config files or clover efi configs or chameleon or whatever!!! its been 2 weeks trying!

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

 

[TomLinconnnnn]

Thanks to this thread I've now been able to get working battery status on my Lenovo T410 (the patch that mentioned a T410 previously didn't work for mine).

Mine is a 2516-DCU (core i5 560 2.66Ghz w/ bios 1.45 w/ whitelist for wlan which is a Dell DW1510 half height card, Intel GPU only)

Stock DSDT and the Modded DSDT (using some patches from your repo and some of my own editing) are attached.
Unfortunately my ability to write it in a patch form wasn't something I could do.
The modded one has a lot of changes, device renames, removed CPU cores I don't have, removed WMI, enabled backlight controls.

I do wonder why Amperage is 0 mA and Voltage seems high but maybe thats fine for mV.

Battery Information:

  Model Information:
  Serial Number:    42T4791-16240
  Manufacturer:    SANYO
  Device Name:    42T4791
  Charge Information:
  The battery's charge is below the critical level.:    No
  The battery's charge is below the warning level.:    No
  Charge Remaining (mAh):    2891
  Fully Charged:    Yes
  Charging:    No
  Full Charge Capacity (mAh):    2896
  Health Information:
  Cycle Count:    384
  Condition:    Replace Soon
  Battery Installed:    Yes
  Amperage (mA):    0
  Voltage (mV):    12138

And after refreshing the info a few minutes later the values changed...

  Charge Remaining (mAh):    3109
  Fully Charged:    Yes
  Charging:    No
  Full Charge Capacity (mAh):    3128

Dear Ludacrisvp, thanks for your instruction. I am hoping your DSDT can be used for T410s.
the info of my notebook is as following:
T410s
CUP I5 M520
Integrated HD Graphics
Motherboard QS57

Thanks a lot!
Tom

 

[RehabMan]

Dear Ludacrisvp, thanks for your instruction. I am hoping your DSDT can be used for T410s.
the info of my notebook is as following:
T410s
CUP I5 M520
Integrated HD Graphics
Motherboard QS57

Thanks a lot!
Tom

Never a good idea to use a ACPI files from another computer.
Always patch your own.
Guide is linked from the FAQ.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[TomLinconnnnn]

Never a good idea to use a ACPI files from another computer.
Always patch your own.
Guide is linked from the FAQ.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Thanks! RehabMan