- Joined
- Jun 29, 2013
- Messages
- 2
- Motherboard
- Gigabyte GA-Z77X-UP4 TH
- CPU
- Intel Core i7-3770K
- Graphics
- Gigabyte NVIDIA Geforce Titan
- Mac
- Classic Mac
- Mobile Phone
I got a Gigabyte GA-Z77X-UP4 TH Mainboard and a Gigabyte NVIDIA Geforce Titan attached to it. 10.8.4 is already installed, but I didn't used Multibeast so far, cause I'm really not sure which driver I should install.
Booting seems a bit difficult on it.
1. If I remove the Geforce and attach the DVI-cable to the mainboard I can access BIOS, but if I try to boot from my MountainLion SSD it stucks on the Apple-startup screen, with an endless spinning wheel.
2. If I add the Geforce to my setup I don't get a signal from the DVI-port on my mainboard anymore, only from the ports on my Geforce. The screen with the BIOS-keys stays a lot longer (around 4 minutes), but I can't access BIOS anymore. After the screen disappears 10.8.4 boots and everything works fine.
Sorry for my english and maybe for the stupid questions, I'm completly new to this, but I try to reduce the unnecessary questions to a minimum. I would try to google for it, but I don't know where to start.
Booting seems a bit difficult on it.
1. If I remove the Geforce and attach the DVI-cable to the mainboard I can access BIOS, but if I try to boot from my MountainLion SSD it stucks on the Apple-startup screen, with an endless spinning wheel.
2. If I add the Geforce to my setup I don't get a signal from the DVI-port on my mainboard anymore, only from the ports on my Geforce. The screen with the BIOS-keys stays a lot longer (around 4 minutes), but I can't access BIOS anymore. After the screen disappears 10.8.4 boots and everything works fine.
Sorry for my english and maybe for the stupid questions, I'm completly new to this, but I try to reduce the unnecessary questions to a minimum. I would try to google for it, but I don't know where to start.