- Joined
- Nov 2, 2018
- Messages
- 191
- Motherboard
- Dell Optiplex 3090 i3 MFF
- CPU
- i3-10105T
- Graphics
- UHD 630
- Mac
- Mobile Phone
An OptiPlex MFF 3090 i3-10105 is configured with OC & Monterey as described (EdHawk2config.plist link):
Although 2k resolution via Displayport works fine, 4K resolution does not work as described:
The Optiplex has two display port outputs: DP to DP delivers fails to deliver 4K resolution & delivers 2K resolution, however DP to HDMI is problematic.
Attempts to connect to HDMI monitors (4K monitor , 720p TV, 1080p monitor) fail: the Dell Logo is returned as expected. The OpenCore Picker displays correctly, however, once the SSD is selected the screen goes black and returns nothing.
I believe that this is not the first time this problem has been reported. Replies with any diagnostic questions or a remedy are appreciated. Thank you
UPDATE: 10/25/22
=====
HDMI Configuration Theory:
Is there any reason Monterey will not boot on a OptiPlex MFF 3090 i3-10105?
The i5 3090 MFF seems to support Monterey: https://github.com/Aaron9466/dell-optiplex-3090mff-opencore lshw output of the 3090 MFF Intel(R) Core(TM) i3-10105T CPU @ 3.00GHz version is attached. Attempts to boot a Monterey USB installer were unsuccessful. UNRESOLVED RELATED POSTINGS...
www.tonymacx86.com
Although 2k resolution via Displayport works fine, 4K resolution does not work as described:
How to Configure 4K Resolution for an Optiplex 3090 MFF ?
BACKGROUND: An Optiplex 3090 MFF iGPU-HD630 is outfitted with Monterey \ Opencore REL-077-2022-01-10: https://www.tonymacx86.com/threads/is-there-any-reason-monterey-will-not-boot-on-a-optiplex-mff-3090-i3-10105.321903/#post-2336417 The Optiplex is connected with a 4K DisplayPort cable to a...
www.tonymacx86.com
The Optiplex has two display port outputs: DP to DP delivers fails to deliver 4K resolution & delivers 2K resolution, however DP to HDMI is problematic.
Attempts to connect to HDMI monitors (4K monitor , 720p TV, 1080p monitor) fail: the Dell Logo is returned as expected. The OpenCore Picker displays correctly, however, once the SSD is selected the screen goes black and returns nothing.
I believe that this is not the first time this problem has been reported. Replies with any diagnostic questions or a remedy are appreciated. Thank you
UPDATE: 10/25/22
=====
HDMI Configuration Theory:
[GUIDE] General Framebuffer Patching Guide (HDMI Black Screen Problem)
General Framebuffer Patching Guide using Hackintool Please do not quote this guide in its entirety. Post a link instead. 15 Jan 2019: Intel FB-Patcher has been renamed to Hackintool. 19 Jan 2019: Guide overhauled. Please be aware of possible HDMI hot-plug issues. After boot you may have to...
www.tonymacx86.com
Last edited: