Disk Utility doesn't show my hard drive

[H83]

Hi everyone! This is my first post, looking for a solution for my problem.
I tried to install Snow Leopard, using iBoot. The system boot throught the language screen. Then I choose my language and launch Disk Utility but the only drives detected are the DVD Drive and pen drives.
I just can't get it to detect my hard drive. I already enabled AHCI mode on bios and even tried two diferents hard drive, but nothing work. I could use some help

MY SYSTEM:
Motherboard: Gigabyte GA-N680SLI-DQ6
Processor: Intel E2160
Memory: 2x1GB Corsair 800Mhz + 2xKingston 800Mhz
Hard Drive: WD 500GB Sata
Video Card: Gigabyte Nvidia 8800 GTS 320Mb

 

[SnapMan]

Your board has SATA 3 and RAID ports, try a different port for your HDD.

If you are on SATA ports 0 and 1 swap the HDD and DVD, see if that helps.

If still no go, try SATA 0 and RAID 0 ports.

 

[VladMecca]

Hi everybody,

I have the same problem with same mobo?
H83 did you solve it? How?
Any suggestions?

 

[totenkopf4]

Hi everybody,

I have the same problem with same mobo?
H83 did you solve it? How?
Any suggestions?

To Both VladMecca and H83

This Motherboard has a NVIDIA nForce 680i SLI controller...

Our tools and methods do not work w non Intel Controllers.

See the RULES which state this so...

So as this is a DEAD HORSE ..... its headed to the GLUE Factory.