Contribute
Register

didii's Claire9 Haswell build: Asus Maximus VI Impact | i5-4670k | GTX 650 TI Boost

Status
Not open for further replies.
Thank you for your reply.:D
I just had tried to boot with "-x graphicsenabler=no maxmem=4096" and failed to enter the installation again. And your advice has made me to realise that tonymacx86 had recommended that
For best results with the latest 8-series motherboards and Haswell CPUs, remove all but 1 stick of RAM for the installation process. You can put back extra RAM sticks after post-installation is finished.
Click to expand...
in the guide. So I just did it. With or without your flag it still does not work.
Here is one screenshot of several times just now:
IMG_20140429_215748.jpg
I use the word "many" because other tries I did not flag "-v" and the screen just went to deathly black with keyboard freezed after apple's logo.

I can feel that my pc is so unstable for unibeast. Here is one screenshot yesterday, which was the only occasion successful enter:
2014_04_28_17_39_24.jpg
I just want to prove that my pc can run unibeast and os x even once.
But, it is unstable.:crazy:
 
Desktop
GRYPHON Z97 |  i5 4570 |  GTX 750ti
For info, boot flags are case sensitive - graphicsenabler=no is wrong

It should be GraphicsEnabler=No

Good Luck

Boot Flag Info
 
didii said:
@Polochamps: Try to ask the people at Clover subforum for installing the FileNVRAM, man. I have no idea about that bootloader :p.

my GTX770 isn't throttling. I can see the clocks rockets when running Heaven. Hmm, might need to ask other members in this forum, I guess. Sorry i couldn't be much of a help, Polo.

@CaonLiu: Where did you plug your Unibeast USB? Try to use the USB 2.0 port, or try to change it to other ports. Hopefully it works :thumbup:
Click to expand...

Thank you for your reply!~:D
I had tried this before.
Even though it does not make my pc better, I still always try to boot from USB 2.0 port.
Now, I had some doubt with my bios setting. Because sometimes the funcion "load optimized setting" do not change some settings. Could you show your bios to us, please ?
Thank you!:p
 
Desktop
GRYPHON Z97 |  i5 4570 |  GTX 750ti
didii said:
@Polochamps: Try to ask the people at Clover subforum for installing the FileNVRAM, man. I have no idea about that bootloader :p.

my GTX770 isn't throttling. I can see the clocks rockets when running Heaven. Hmm, might need to ask other members in this forum, I guess. Sorry i couldn't be much of a help, Polo.
Click to expand...


Thanks! I'll try to ask about the FileNVRAM on the clover section.

If your GTX 770 isn't throttling then it has the same power issue. It should reduce its clocks when it isn't used otherwise it will consume more power on idle and we don't want that to happen.

- Close any open application.
- Try to check and record your gpu idle clocks on HWMonitor.
- Open "Preview" and check/record your gpu clocks.
- Close "Preview"
- Check again your gpu clocks. It should return to its "idle state".
 
Mac Pro
Maximus VI Impact |  i5 4670K |  GeForce GTX 660 Ti
caonliu said:
sorry, it does not change things.
Click to expand...

Sorry to hear about that but don't give up. I had that same problem before I successfully installed Mavericks.

Try any combination of this boot args:

cpus=1
dart=0
GraphicsEnabler=no
-x
maxmem=4096

Or this:

GraphicsEnabler=Yes
PCIRootUID=1
-v USBBusFix=yes
-v UHCIreset=yes
 
Mac Pro
Maximus VI Impact |  i5 4670K |  GeForce GTX 660 Ti
@polo: Oh shoot, yes u're right, polo! it's not going back to its idle state! I never actually put any attention to that :p. Need to find a solution for this, now
 
Polochamps said:
Sorry to hear about that but don't give up. I had that same problem before I successfully installed Mavericks.

Try any combination of this boot args:

cpus=1
dart=0
GraphicsEnabler=no
-x
maxmem=4096

Or this:

GraphicsEnabler=Yes
PCIRootUID=1
-v USBBusFix=yes
-v UHCIreset=yes
Click to expand...

Thank you!~:thumbup: I just had tried to boot with "IGPEnabler=Yes -x IGPlatformID=0x04128086" and had entered into installation successfully more than once. The combination of flags does work generally.

But, I still cannot boot without "-x" to enter whatever the installation or the OS X. Without -x, my pc would go to KP. Here is one of the report:

Code: 
Apr 30 23:25:40 localhost kernel[0] <Debug>: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
Apr 30 23:25:40 localhost kernel[0] <Debug>: FakeSMCKeyStore: started
Apr 30 23:25:40 localhost kernel[0] <Debug>: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
Apr 30 23:25:40 localhost kernel[0] <Debug>: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
Apr 30 23:25:40 localhost kernel[0] <Debug>: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
Apr 30 23:25:40 localhost kernel[0] <Debug>: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
Apr 30 23:25:40 localhost kernel[0] <Debug>: calling mpo_policy_init for Sandbox
Apr 30 23:25:40 localhost kernel[0] <Debug>: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Apr 30 23:25:40 localhost kernel[0] <Debug>: calling mpo_policy_init for Quarantine
Apr 30 23:25:40 localhost kernel[0] <Debug>: Security policy loaded: Quarantine policy (Quarantine)
Apr 30 23:25:40 localhost kernel[0] <Debug>: calling mpo_policy_init for TMSafetyNet
Apr 30 23:25:40 localhost kernel[0] <Debug>: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Apr 30 23:25:40 localhost kernel[0] <Debug>: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 30 23:25:40 localhost kernel[0] <Debug>: The Regents of the University of California. All rights reserved.
Apr 30 23:25:40 localhost kernel[0] <Debug>: MAC Framework successfully initialized
Apr 30 23:25:40 localhost kernel[0] <Debug>: using 16384 buffer headers and 10240 cluster IO buffer headers
Apr 30 23:25:40 localhost kernel[0] <Debug>: IOAPIC: Version 0x20 Vectors 64:87
Apr 30 23:25:40 localhost kernel[0] <Debug>: ACPI: sleep states S3 S4 S5
Apr 30 23:25:40 localhost kernel[0] <Debug>: CPUSensors: CPU family 0x6, model 0x3c, stepping 0x3, cores 4, threads 4, TJmax 100
Apr 30 23:25:40 localhost kernel[0] <Debug>: CPUSensors: setting platform keys to [j43     ]
Apr 30 23:25:40 localhost kernel[0] <Debug>: CPUSensors: RAPL units power: 0x3 energy: 0xe time: 0xa
Apr 30 23:25:40 localhost kernel[0] <Debug>: CPUSensors: started
Apr 30 23:25:40 localhost kernel[0] <Debug>: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (39 cpu) 0x7f80000000, 0x80000000
Apr 30 23:25:40 localhost kernel[0] <Debug>: [ PCI configuration begin ]
Apr 30 23:25:40 localhost kernel[0] <Debug>: console relocated to 0x7f80000000
Apr 30 23:25:40 localhost kernel[0] <Debug>: [ PCI configuration end, bridges 4, devices 13 ]
Apr 30 23:25:40 localhost kernel[0] <Debug>: ACPISensors (TZ00): 1 sensor added
Apr 30 23:25:40 localhost kernel[0] <Debug>: ACPISensors (TZ00): started
Apr 30 23:25:40 localhost kernel[0] <Debug>: ACPISensors (TZ01): 1 sensor added
Apr 30 23:25:40 localhost kernel[0] <Debug>: ACPISensors (TZ01): started
Apr 30 23:25:40 localhost kernel[0] <Debug>: HDAEnabler: Copyright (c) 2008 by Kabyl
Apr 30 23:25:40 localhost kernel[0] <Debug>: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Apr 30 23:25:40 localhost kernel[0] <Debug>: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Apr 30 23:25:40 localhost kernel[0] <Debug>: HDAEnabler: Copyright (c) 2008 by Kabyl
Apr 30 23:25:40 localhost kernel[0] <Debug>: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Apr 30 23:25:40 localhost kernel[0] <Debug>: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Apr 30 23:25:40 localhost kernel[0] <Debug>: FakeSMC v6.0.1123 Copyright 2014 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved.
Apr 30 23:25:40 localhost kernel[0] <Debug>: FakeSMC: 13 preconfigured keys added
Apr 30 23:25:40 localhost kernel[0] <Debug>: SMC: successfully initialized
Apr 30 23:25:40 localhost kernel[0] <Debug>: mcache: 4 CPU(s), 64 bytes CPU cache line size
Apr 30 23:25:40 localhost kernel[0] <Debug>: mbinit: done [96 MB total pool size, (64/32) split]
Apr 30 23:25:40 localhost kernel[0] <Debug>: Pthread support ABORTS when sync kernel primitives misused
Apr 30 23:25:40 localhost kernel[0] <Debug>: SuperIODevice: found Nuvoton NCT6791D on port=0x2e address=0x290
Apr 30 23:25:40 localhost kernel[0] <Debug>: srom rev:11
Apr 30 23:25:40 localhost kernel[0] <Debug>: ARPT: 0.990958: BTCOEXIST off 
Apr 30 23:25:40 localhost kernel[0] <Debug>: ARPT: 0.991047: BRCM tunables:
Apr 30 23:25:40 localhost kernel[0] <Debug>: ARPT: 0.991051:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
Apr 30 23:25:40 localhost kernel[0] <Debug>: ARPT: 0.991377: wl0: Broadcom BCM43b1, vendorID[0x14e4] BAR0[0xf7e00004]
Apr 30 23:25:40 localhost kernel[0] <Debug>: 6.30.223.154 (r420397)
Apr 30 23:25:40 localhost kernel[0] <Debug>: rooting via boot-uuid from /chosen: 0B0FFB8D-6E79-3BF9-8E89-FABD56125836
Apr 30 23:25:40 localhost kernel[0] <Debug>: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 30 23:25:40 localhost kernel[0] <Debug>: com.apple.AppleFSCompressionTypeDataless kmod start
Apr 30 23:25:40 localhost kernel[0] <Debug>: NCT677xSensors: [Warning] wrong vendor ID=0xffff
Apr 30 23:25:40 localhost kernel[0] <Debug>: NCT677xSensors: started
Apr 30 23:25:40 localhost kernel[0] <Debug>: com.apple.AppleFSCompressionTypeZlib kmod start
Apr 30 23:25:40 localhost kernel[0] <Debug>: com.apple.AppleFSCompressionTypeDataless load succeeded
Apr 30 23:25:40 localhost kernel[0] <Debug>: com.apple.AppleFSCompressionTypeZlib load succeeded
Apr 30 23:25:40 localhost kernel[0] <Debug>: vendor:device: 0x8086:0x153b.
Apr 30 23:25:40 localhost kernel[0] <Debug>: AppleIntelE1000e(Info): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Apr 30 23:25:40 localhost kernel[0] <Debug>: AppleIntelE1000e(Info): changing MTU from 0 to 1500
Apr 30 23:25:40 localhost kernel[0] <Debug>: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SAT0@1F,2/AppleIntelPchSeriesAHCI/PRT1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/SanDisk SDSSDHP128G Media/IOGUIDPartitionScheme/Mavericks@2
Apr 30 23:25:40 localhost kernel[0] <Debug>: BSD root: disk0s2, major 1, minor 2
Apr 30 23:25:40 localhost kernel[0] <Debug>: jnl: b(1, 2): replay_journal: from: 106496 to: 1758208 (joffset 0x143000)
Apr 30 23:25:40 localhost kernel[0] <Debug>: AppleIntelE1000e(Info): AppleIntelE1000e:WOL = 2
Apr 30 23:25:40 localhost kernel[0] <Debug>: jnl: b(1, 2): journal replay done.
Apr 30 23:25:40 localhost kernel[0] <Debug>: hfs: mounted Mavericks on device root_device
Apr 30 23:25:40 localhost kernel[0] <Debug>: XCPM: registered
Apr 30 23:25:40 localhost kernel[0] <Debug>: Kext com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport might not load - kextd is currently unavailable.
Apr 30 23:25:40 localhost kernel[0] <Debug>: USBMSC Identifier (non-unique): 00000000000089 0x1307 0x165 0x100, 2
Apr 30 23:25:40 localhost kernel[0] <Debug>: hfs: Removed 1 orphaned / unlinked files and 4 directories 
Apr 30 23:25:40 localhost com.apple.SecurityServer[13] <Notice>: Session 100000 created
Apr 30 23:25:40 localhost kernel[0] <Debug>: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
Apr 30 23:25:40 localhost kernel[0] <Debug>: IO80211Interface::efiNVRAMPublished():  
Apr 30 23:25:40 localhost com.apple.SecurityServer[13] <Notice>: Entering service
Apr 30 23:25:40 localhost kernel[0] <Debug>: flow_divert_kctl_disconnect (0): disconnecting group 1
Apr 30 23:25:41 Alexanders-Mac-Pro kernel[0] <Debug>: HDAEnabler: Copyright (c) 2008 by Kabyl
Apr 30 23:25:41 Alexanders-Mac-Pro kernel[0] <Debug>: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Apr 30 23:25:41 Alexanders-Mac-Pro kernel[0] <Debug>: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Apr 30 23:25:41 Alexanders-Mac-Pro kernel[0] <Debug>: HDAEnabler: Copyright (c) 2008 by Kabyl
Apr 30 23:25:41 Alexanders-Mac-Pro kernel[0] <Debug>: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Apr 30 23:25:41 Alexanders-Mac-Pro kernel[0] <Debug>: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Apr 30 23:25:41 Alexanders-Mac-Pro kernel[0] <Debug>: Previous Shutdown Cause: 5
Apr 30 23:25:41 Alexanders-Mac-Pro kernel[0] <Debug>: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
Apr 30 23:25:41 Alexanders-Mac-Pro kernel[0] <Debug>: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x5800 ****
Apr 30 23:25:41 Alexanders-Mac-Pro kernel[0] <Debug>: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0x5800 ****
Apr 30 23:25:41 Alexanders-Mac-Pro kernel[0] <Debug>: Waiting for DSMOS...
Apr 30 23:25:45 Alexanders-Mac-Pro kernel[0] <Debug>: VM Swap Subsystem is ON
Apr 30 23:25:45 Alexanders-Mac-Pro.local digest-service[96] <Notice>: label: default
Apr 30 23:25:45 Alexanders-Mac-Pro.local digest-service[96] <Notice>: 	dbname: od:/Local/Default
Apr 30 23:25:45 Alexanders-Mac-Pro.local digest-service[96] <Notice>: 	mkey_file: /var/db/krb5kdc/m-key
Apr 30 23:25:45 Alexanders-Mac-Pro.local digest-service[96] <Notice>: 	acl_file: /var/db/krb5kdc/kadmind.acl
Apr 30 23:25:45 Alexanders-Mac-Pro.local digest-service[96] <Notice>: digest-request: uid=0
Apr 30 23:25:45 Alexanders-Mac-Pro.local digest-service[96] <Notice>: digest-request: netr probe 0
Apr 30 23:25:45 Alexanders-Mac-Pro.local digest-service[96] <Notice>: digest-request: init request
Apr 30 23:25:45 Alexanders-Mac-Pro.local digest-service[96] <Notice>: digest-request: init return domain: BUILTIN server: ALEXANDERS-MAC-PRO indomain was: <NULL>
Apr 30 23:25:45 Alexanders-Mac-Pro kernel[0] <Debug>: AirPort_Brcm4360_P2PInterface::init name <p2p0> role 1
Apr 30 23:25:45 Alexanders-Mac-Pro kernel[0] <Debug>: AirPort_Brcm4360_P2PInterface::init() <p2p> role 1
Apr 30 23:25:45 Alexanders-Mac-Pro kernel[0] <Debug>: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
Apr 30 23:25:46 Alexanders-Mac-Pro kernel[0] <Debug>: ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
Apr 30 23:25:46 Alexanders-Mac-Pro kernel[0] <Debug>: WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3c
Apr 30 23:25:46 Alexanders-Mac-Pro kernel[0] <Debug>: -- power management may be incomplete or unsupported
Apr 30 23:25:46 Alexanders-Mac-Pro kernel[0] <Debug>: DSMOS has arrived
Apr 30 23:25:46 Alexanders-Mac-Pro kernel[0] <Debug>: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x5800 
Apr 30 23:25:46 Alexanders-Mac-Pro kernel[0] <Debug>: [IOBluetoothHCIController][start] -- completed
Apr 30 23:25:46 Alexanders-Mac-Pro kernel[0] <Debug>: [IOBluetoothHCIController::setConfigState] calling registerService
Apr 30 23:25:46 Alexanders-Mac-Pro kernel[0] <Debug>: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0xc700 -- 0xd800 -- 0x5800 ****
Apr 30 23:25:47 Alexanders-Mac-Pro.local com.apple.SecurityServer[13] <Notice>: Session 100004 created
Apr 30 23:25:54 Alexanders-Mac-Pro kernel[0] <Debug>: AppleKeyStore:Sending lock change 0
Apr 30 23:25:56 Alexanders-Mac-Pro.local com.apple.SecurityServer[13] <Notice>: Session 100008 created
Apr 30 23:25:56 Alexanders-Mac-Pro kernel[0] <Debug>: hfs: mounted chimera on device disk2s1
Apr 30 23:25:56 Alexanders-Mac-Pro.local com.apple.SecurityServer[13] <Notice>: Session 100009 created
Apr 30 23:25:58 Alexanders-Mac-Pro.local com.apple.SecurityServer[13] <Notice>: Session 100013 created
Apr 30 23:26:00 Alexanders-Mac-Pro kernel[0] <Debug>: AppleIntelE1000e(Info): e1000e NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
Apr 30 23:26:35 alexanders-pro kernel[0] <Debug>: **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOUSBHighSpeedSplitError error - retrying: 1 -- 0x5800 
Apr 30 23:26:36 alexanders-pro kernel[0] <Debug>: **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOUSBHighSpeedSplitError error - retrying: 2 -- 0x5800 
Apr 30 23:26:36 alexanders-pro kernel[0] <Debug>: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5800 ****
Apr 30 23:26:36 alexanders-pro kernel[0] <Debug>: **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOUSBHighSpeedSplitError error - retrying: 3 -- 0x5800 
Apr 30 23:26:36 alexanders-pro kernel[0] <Debug>: **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOUSBHighSpeedSplitError error - retrying: 4 -- 0x5800 
Apr 30 23:26:36 alexanders-pro kernel[0] <Debug>: **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOUSBHighSpeedSplitError error - retrying: 5 -- 0x5800 
Apr 30 23:26:36 alexanders-pro kernel[0] <Debug>: **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOUSBHighSpeedSplitError error - no more retries - bailing out -- 0x5800 ****
Apr 30 23:28:54 alexanders-pro kernel[0] <Debug>: USBMSC Identifier (non-unique): 20090815198100000 0xbda 0x119 0x1981, 2
Apr 30 23:28:56 alexanders-pro kernel[0] <Debug>: hfs: mounted um on device disk3s1
Apr 30 23:29:05 alexanders-pro kernel[0] <Debug>: hfs: unmount initiated on um on device disk3s1
Apr 30 23:30:40 alexanders-pro kernel[0] <Debug>: Resetting IOCatalogue.


with my configuration of multibeasts:
Screen Shot 2014-04-30 at 11.40.24 PM.png
Screen Shot 2014-04-30 at 11.39.05 PM.png
Oh, I had installed bcm4352.kext supplied by diddi and thanks for him. But it seems that the bluetooth has some problems from my KP report. It actually work perfectly on my Mavericks with boot of "-x".
Now, my problem is, how can I boot without "-x"?
Thank you, guys. Thanks all of you!:headbang:
 
Desktop
GRYPHON Z97 |  i5 4570 |  GTX 750ti
@Caonliu:Hi Caon, the bcm4352 kext isn't supplied by me, btw. It's by Toleda :thumbup:. Yeah, if you're following my guide, the bluetooth won't work anymore past 10.9.0. THere's a workaround posted by frfrfrfr in a couple of pages back. you should find it there.

Another thing, how do you boot to OSX now? still using the Unibeast USB? Because i don't see the chimera bootloader on your multibeast settings.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top