Contribute
Register

[DEPRECATED] ASRock Rack EP2C602 Install Guide for Sierra and High Sierra

Status
Not open for further replies.
Unzip it and put this ssdl patch in Clover/ACPI/Patched.
Thanks for the information
Can you compare my EFI folder with yours.
Is there anything I should change
 

Attachments

  • EFI.zip
    30.3 MB · Views: 87
Thanks for the information
Can you compare my EFI folder with yours.
Is there anything I should change
Hi thank you for the SSDT
by replacing your file in patched folder made a good improvement in the benchmark score. but still not upto the mark..
is there anything I should look at in clover ?
 

Attachments

  • Screen Shot 2018-11-01 at 5.25.07 PM.png
    Screen Shot 2018-11-01 at 5.25.07 PM.png
    111 KB · Views: 95
In your kexts, there's nullcpupowermanagement kext. From the guide, this is not recommended. It may cause the CPU turbo problem.
Add some CPU monitoring kexts to check the CPU cores and frequency changes during the CPU benchmark.

Hi thank you for the SSDT
by replacing your file in patched folder made a good improvement in the benchmark score. but still not upto the mark..
is there anything I should look at in clover ?
 
Hi aince we are using pretty much the same configuration . Can i have your EFi
 
Hi aince we are using pretty much the same configuration . Can i have your EFi
Hi thank you for the SSDT
by replacing your file in patched folder made a good improvement in the benchmark score. but still not upto the mark..
is there anything I should look at in clover ?
In your kexts, there's nullcpupowermanagement kext. From the guide, this is not recommended. It may cause the CPU turbo problem.
Add some CPU monitoring kexts to check the CPU cores and frequency changes during the CPU benchmark.
kindly check the screenshot attached
 

Attachments

  • Screen Shot 2018-11-02 at 10.52.36 AM.png
    Screen Shot 2018-11-02 at 10.52.36 AM.png
    1.8 MB · Views: 93
  • Screen Shot 2018-11-02 at 10.54.30 AM.png
    Screen Shot 2018-11-02 at 10.54.30 AM.png
    2.1 MB · Views: 79
Thanks for the reply
But it sounds Chinees to me...
But i will try this..
It would be highly appreciated if you could help me via team viewer or something...
Thank you
I did the changes and added ke
could you please check my EFI
I did the hardware monitor after installing the kexts
It looks like my 8 cores only working
Kindly check the screen shot
 

Attachments

  • Screen Shot 2018-11-02 at 10.52.36 AM.png
    Screen Shot 2018-11-02 at 10.52.36 AM.png
    1.8 MB · Views: 88
Don't copy someone else's EFI. You need to make your own ssdt per the guide. As previously stated, yours is not generated correctly. As also pointed out by others, the ssdt and NullCpuPowerManagement conflict and are mutually exclusive. You should only use one or the other.
 
@SULFI and @pinerix Why did you choose E5-2690 v2 CPU? You could choose better CPU option.
E5 2690v2 is affordable for me. And with a dual cpu setups i can do a lot of rendering pretty faster.
 
Status
Not open for further replies.
Back
Top