Dell XPS 13 - How to boot of USB?

[thVOX]

So I am following this guide https://www.tonymacx86.com/threads/clover-basics-and-switching-advice.171680/ and this guide https://www.tonymacx86.com/threads/clover-basics-and-switching-advice.171680/ to see a create a test USB for Clover for my Dell XPS 13 9350 (i7-6560u). So I think I did everything right. Downloading macOS from the App Store. Using UniBeast to create my USB and then I plugged into my dell with a brand new m.2 ssd that I was planning on using for macOS. But my laptop is not seeing the USB drive and just goes into this tool to check that nothing is broken. Did I do something wrong or is there something more I need to do to make my USB bootable. Thanks

 

[Killuminati91]

Take a look at this guide for BIOS settings:
https://www.tonymacx86.com/threads/...a-10-12-x-lts-long-term-support-guide.213141/

Probably have to disable fast and secure boot.

 

[RehabMan]

So I am following this guide https://www.tonymacx86.com/threads/clover-basics-and-switching-advice.171680/ and this guide https://www.tonymacx86.com/threads/clover-basics-and-switching-advice.171680/ to see a create a test USB for Clover for my Dell XPS 13 9350 (i7-6560u). So I think I did everything right. Downloading macOS from the App Store. Using UniBeast to create my USB and then I plugged into my dell with a brand new m.2 ssd that I was planning on using for macOS. But my laptop is not seeing the USB drive and just goes into this tool to check that nothing is broken. Did I do something wrong or is there something more I need to do to make my USB bootable. Thanks

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

 

[thVOX]

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

thank you. I have just created my bootable USB and tried to boot off it. I can get into Clover Bootloader and I clicked on the Boot OS X Install from Install macOS Sierra. I get the black screen with the apple logo but after about 25 seconds, I get a no-symbol. Looks like this:

In case this is relevant:
I'm using a USB 2.0 Drive and both USB ports on the laptop are USB 3.0 that has a 16gb capacity
I'm in UEFI mode
I partitioned the drive with a MBR with a FAT32 partition
Here is what my EFI/CLOVER folder looks like:

 

[RehabMan]

thank you. I have just created my bootable USB and tried to boot off it. I can get into Clover Bootloader and I clicked on the Boot OS X Install from Install macOS Sierra. I get the black screen with the apple logo but after about 25 seconds, I get a no-symbol. Looks like this:

In case this is relevant:
I'm using a USB 2.0 Drive and both USB ports on the laptop are USB 3.0 that has a 16gb capacity
I'm in UEFI mode
I partitioned the drive with a MBR with a FAT32 partition
Here is what my EFI/CLOVER folder looks like:

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[thVOX]

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

whoops. sorry about that. I think I included everything this time...
Verbose:

 

[suffering]

whoops. sorry about that. I think I included everything this time...
Verbose:

Try OsxAptioFix2Drv-64.efi instead of OsxAptioFixDrv-64.efi

 

[thVOX]

Try OsxAptioFix2Drv-64.efi instead of OsxAptioFixDrv-64.efi

OK. I did that and my laptop has have the apple logo on the black screen when I first boot off the USB or about 10 minutes now. Should I wait longer or is there something I should do?

 

[RehabMan]

OK. I did that and my laptop has have the apple logo on the black screen when I first boot off the USB or about 10 minutes now. Should I wait longer or is there something I should do?

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[thVOX]

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

I have the Clover files that had OsxAptioFixDrv-64.efi in Post #5 of this thread which you can see my Verbose output, Clover files and I tried to do the patchmatic thing but not sure if I did it right.

Here is my stuff for OsxAptioFix2Drv-64.efi

Verbose: