- Joined
- Jun 5, 2020
- Messages
- 34
- Motherboard
- Optiplex 7020 SFF
- CPU
- i5 4590
- Graphics
- HD4600
Also is this only possible with OC bootloader and not with Clover ?
I am using OpenCore; however, this should work in Clover. @0xd1ab10 are you using clover can you confirm?
I did some reading to make sure:
According to WhatEverGreen (source: https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md) you can inject properties for patches using either Clover or OpenCore. To inject properties, use Devices-Properties section for Clover or DeviceProperties section for OpenCore in config.plist. That's a highly technical document, so I also spent some time in the Idiot's Guide found on this forum looking at WhatEverGreen IGPU manual configuration (scroll down to Chapter 4). Device Properties are defined in Clover's config.plist under Devices -> Properties section and a property consists of a name and a data value. As far as I can tell the names and data values are the same for both OC and Clover.
You can add Device Properties by directly editing your config.plist file using a code editor (I use ProperTree).
TL;DR should work in Clover as well since it's a WEG thing not an OC thing, but need someone to test/confirm