Dell Latitude E5430 - Unable to Reach Installer Screen

[Noona]

Trying to do a Hackbook on a Dell Latitude E5430.
Can't seem to get it working.
I have tried different USB ports with different results.
I have tried with UEFI and Legacy, both Clover.

I get this screen with UEFI. I don't know what it means, or what I'm supposed to do.
It will attempt to load for a bit, and then it ends up reaching this screen.
If I'm supposed to use bootflags, I don't know which ones to use.
I do not have a DSDT. I don't know how to get/make a DSDT.

For Legacy, it just hits a blank screen, and sits there.

For Legacy, if I use GraphicsEnabler=No, it gives the same screen below.

Using an external monitor connected to HDMI has helped. It shows something on the monitor, but it's garbled. I can see a loading bar move. It only displays on the upper half of the monitor. It doesn't use the bottom half.

I've done Hack-desktops, but not laptops.

 

[P1LGRIM]

Not a Desktop - Moved to Laptop Support.

 

[Noona]

Not a Desktop - Moved to Laptop Support.

Sorry.

 

[Feartech]

Sorry.

As per rules, please update your hardware profile to allow others to help you easier

https://www.tonymacx86.com/account/account-details

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

This is an updated FAQ from the Original Thread: https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/post-1045259 Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum...

www.tonymacx86.com

 

[Noona]

As per rules, please update your hardware profile to allow others to help you easier

https://www.tonymacx86.com/account/account-details

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

This is an updated FAQ from the Original Thread: https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/post-1045259 Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum...

www.tonymacx86.com

Updated.

 

[Feartech]

Updated.

zip and upload your EFI

 

[Noona]

These are just the stock EFI's from UniBeast for both UEFI, and legacy. It's nothing fancy.

 

[Feartech]

These are just the stock EFI's from UniBeast for both UEFI, and legacy. It's nothing fancy.

unibeast is for desktops

try an old version of clover:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

 

[Noona]

unibeast is for desktops

try an old version of clover:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

The newer version of UniBeast I was using, does use Clover. Do you mean to use Clover only?

 

[Feartech]

The newer version of UniBeast I was using, does use Clover. Do you mean to use Clover only?

yes, follow the link above