- Joined
- Aug 20, 2018
- Messages
- 26
- Motherboard
- Dell Latitude 5290 2-in1
- CPU
- i5 8350u
- Graphics
- UHD 630
DELL LATITUDE 5290 2-IN-1
CPU : i5 8350U (VPRO)
GRAPHIC : INTEL UHD GRAPHICS 620
MEMORY : SAMSUNG LPDDR3 4GB (2EA)
SSD : TOSHIBA KXG60ZMV256G 256GB
DISPLAY : 12.3 INCH 1920 X 1280(WUXGA+) 4:3 10 POINTS MULTI TOUCH
PORT & SLOT : USB 3.1 * 1, TYPE C * 2 (USB 3.1, DISPLAY PORT, POWER DELIVERY), AUDIO JACK * 1, SMART CARD READER * 1 USIM SLOP * 1, LOCK SLOT *1
BATTERY : 42WHR
WINDOWS 10 PRO
-------------------------------------------
Properties - PciRoot(0x0)/Pci(0x2,0x0)
device-id = 3EA50000
AAPL,ig-platform-id = 3E9B0007
I entered this and recognized the built-in graphics, but the internal monitor of the laptop shows a blackout screen with backlight after the v log and only the external monitor is recognized.
(Fortunately, all ports of type C have DP OUT enabled.)
My Built-in monitor is 12.3 inch 1920*1280(WUXGA+ 4:3) eDP.
I have tried EDID injection of the built-in monitor but not work.
If I clear device-id, AAPL,ig-platform-id value then can boot with built-in monitor but 9mb vram.
It is expected that this problem will occur because ig-platform-id = 3E9B0007 is a desktop ID, but currently there is no booting to QE / CI active other than this value.
Attached ProblemReportFile, EDIDFile
CPU : i5 8350U (VPRO)
GRAPHIC : INTEL UHD GRAPHICS 620
MEMORY : SAMSUNG LPDDR3 4GB (2EA)
SSD : TOSHIBA KXG60ZMV256G 256GB
DISPLAY : 12.3 INCH 1920 X 1280(WUXGA+) 4:3 10 POINTS MULTI TOUCH
PORT & SLOT : USB 3.1 * 1, TYPE C * 2 (USB 3.1, DISPLAY PORT, POWER DELIVERY), AUDIO JACK * 1, SMART CARD READER * 1 USIM SLOP * 1, LOCK SLOT *1
BATTERY : 42WHR
WINDOWS 10 PRO
-------------------------------------------
Properties - PciRoot(0x0)/Pci(0x2,0x0)
device-id = 3EA50000
AAPL,ig-platform-id = 3E9B0007
I entered this and recognized the built-in graphics, but the internal monitor of the laptop shows a blackout screen with backlight after the v log and only the external monitor is recognized.
(Fortunately, all ports of type C have DP OUT enabled.)
My Built-in monitor is 12.3 inch 1920*1280(WUXGA+ 4:3) eDP.
I have tried EDID injection of the built-in monitor but not work.
If I clear device-id, AAPL,ig-platform-id value then can boot with built-in monitor but 9mb vram.
It is expected that this problem will occur because ig-platform-id = 3E9B0007 is a desktop ID, but currently there is no booting to QE / CI active other than this value.
Attached ProblemReportFile, EDIDFile