Contribute
Register

Dell Inspiron 7391 2in1 (Comet Lake) - Status: Cant boot installer

Status
Not open for further replies.
Joined
Aug 11, 2016
Messages
161
Motherboard
Asus Z170I PRO Gaming
CPU
i5 6600k
Graphics
GTX 1060
1. Dell Inspiron 7391 2in1 Black Edition Specs:
i7-10510U (Comet Lake)
16GB DDR3
NVMe BC511 SK hynix 512GB
Full HD Touchscreen

2. BIOS:
- Disabled Secureboot
- Disabled VT-d
- Boot Mode: UEFI (Legacy not supported anyway)
- SATA Mode: AHCI
- Fastboot: Thorough

3. Problems:
The Laptop will not let me boot the installer. Booting into clover works fine, once I attempt to start the installer (verbose or not) the laptop freezes and if I press any button I hear a loud beep sound and end up with the following options (dell specific):

Code:
Press F1 key to retry boot.
Press F2 key to reboot into setup.
Press F3 key to run onboard diagnostics.

I've followed all related guides, attached my clover folder with dumped ACPI. Im using the config_HD615_620...plist specificly.
 

Attachments

  • CLOVER.zip
    2.1 MB · Views: 166
Last edited:
Any progress with comet lake?
 
Dell 7391, after boot with clover, +++++++++++
 
1. Dell Inspiron 7391 2in1 Black Edition Specs:
i7-10510U (Comet Lake)
16GB DDR3
NVMe BC511 SK hynix 512GB
Full HD Touchscreen

2. BIOS:
- Disabled Secureboot
- Disabled VT-d
- Boot Mode: UEFI (Legacy not supported anyway)
- SATA Mode: AHCI
- Fastboot: Thorough

3. Problems:
The Laptop will not let me boot the installer. Booting into clover works fine, once I attempt to start the installer (verbose or not) the laptop freezes and if I press any button I hear a loud beep sound and end up with the following options (dell specific):

Code:
Press F1 key to retry boot.
Press F2 key to reboot into setup.
Press F3 key to run onboard diagnostics.

I've followed all related guides, attached my clover folder with dumped ACPI. Im using the config_HD615_620...plist specificly.
I'm getting the same exact problem. Crash right after the clover USB bootscreen on i7 10th gen.
 
Any progress?
 
Use the exact settings from the attached file which was directly extract from my Inspiron 7591 2-in-1.
Dell Inspiron 7591 2-in-1 doesn't need any memory fix at boot time.
Enjoy...:)

Screen Shot 2020-03-11 at 1.54.04 PM.png
 

Attachments

  • EFI.zip
    6.7 MB · Views: 194
Use the exact settings from the attached file which was directly extract from my Inspiron 7591 2-in-1.
Dell Inspiron 7591 2-in-1 doesn't need any memory fix at boot time.
Enjoy...:)

View attachment 454038
In case you already didn't, you should replace the config file with the same file but change to a random serial number so someone doesn't use yours.
 
In case you already didn't, you should replace the config file with the same file but change to a random serial number so someone doesn't use yours.

Thank you for reminding. I regenerated SMBios information after uploading the zip file.
 
1. Dell Inspiron 7391 2in1 Black Edition Specs:
i7-10510U (Comet Lake)
16GB DDR3
NVMe BC511 SK hynix 512GB
Full HD Touchscreen

2. BIOS:
- Disabled Secureboot
- Disabled VT-d
- Boot Mode: UEFI (Legacy not supported anyway)
- SATA Mode: AHCI
- Fastboot: Thorough

3. Problems:
The Laptop will not let me boot the installer. Booting into clover works fine, once I attempt to start the installer (verbose or not) the laptop freezes and if I press any button I hear a loud beep sound and end up with the following options (dell specific):

Code:
Press F1 key to retry boot.
Press F2 key to reboot into setup.
Press F3 key to run onboard diagnostics.

I've followed all related guides, attached my clover folder with dumped ACPI. Im using the config_HD615_620...plist specificly.

Have you successfully get through your Dell 7391?
 
Status
Not open for further replies.
Back
Top