Mrokarvi, did you use a modified BIOS as well on your G33M03?HI macnb
I have E5450 running on my Dell Inspiron 530 with G33M03 motherboard and I successfully installed high sierra on it and running good using clover and multibeast. Almost everything I need is working. I have Nvidia Geforce 210 graphics card working.
My issue is computer sleeps but wakes up with black screen. Any fix for this issue? I couldn't find fix for wakeup issue anywhere online. I will really appreciate if you can help me find the solution.
HI macnb
I have E5450 running on my Dell Inspiron 530 with G33M03 motherboard and I successfully installed high sierra on it and running good using clover and multibeast. Almost everything I need is working. I have Nvidia Geforce 210 graphics card working.
My issue is computer sleeps but wakes up with black screen. Any fix for this issue? I couldn't find fix for wakeup issue anywhere online. I will really appreciate if you can help me find the solution.
That's because the macOS does recognise SATA controller by default. You have to enable it in the DSDT.When I enable RAID, I get the same results, OSX will not see any of the drives in they system once I'm in disk utility. Do you still have a copy of the modified BIOS that you used?
Sorry for my ignorance, Is the DSDT file supposed to be used with unibeast when making the bootable installation drive? I followed the tutorial on this site and I didn't see a place to inject any files..That's because the macOS does recognise SATA controller by default. You have to enable it in the DSDT.
Try my DSDT.aml attached above.
@mrokarvi, please update your profile (personal details) with your Motherboard, CPU and Graphics Card.
If you have a prebuilt computer enter make and model instead of motherboard (Mobo).
Mrokarvi, did you use a modified BIOS as well on your G33M03?
DSDT files are not injected but placed in a folder.Sorry for my ignorance, Is the DSDT file supposed to be used with unibeast when making the bootable installation drive? I followed the tutorial on this site and I didn't see a place to inject any files..
Done!! I'll test it out when I get home! Thanks, much appreciated!DSDT files are not injected but placed in a folder.
If you created a unibeast clover installer USB with ESP partition then there's an EFI partition on that USB. You need to mount that EFI partition and copy the DSDT.aml file to EFI/CLOVER/ACPI/patched folder.
If you created a unibeast clover installer in legacy mode (without an ESP partition) then there's an EFI folder on the root of that USB. Copy the DSDT.aml file to EFI/CLOVER/ACPI/patched folder.
I fixed sleep problem by modifying the DSDT.aml.
You can try my attached DSDT.aml (copy it to your EFI/CLOVER/ACPI/Patched folder).
BTW, I also attach my config.plist file (you need to add your own SMBIOS specific values if you are going to use it) but I suggest that you just try the DSDT on it's own first.
Post your IOREG file from IORegistryExplorer.app