Contribute
Register

Dell Inspiron 11 3000

Joined
Sep 21, 2010
Messages
11
CPU
I3-6100U
Graphics
Intel HD 520
Mobile Phone
Android
I managed to get almost everything working, only the built in camera does not work.
I am using clover to boot my hackintosh and I have attached my DSDT in the post.

What do I need to do to enable the camera?
Please tell me if I need to upload any additional files.
Thanks a lot for your help!
 

Attachments

RehabMan

Moderator
Joined
May 3, 2012
Messages
191,134
Motherboard
Intel DH67BL
CPU
Core i7-2600K
Graphics
Intel HD 3000
Mac
MacBook Air
Mobile Phone
iOS
I managed to get almost everything working, only the built in camera does not work.
I am using clover to boot my hackintosh and I have attached my DSDT in the post.

What do I need to do to enable the camera?
Please tell me if I need to upload any additional files.
Thanks a lot for your help!
Do you see the camera in System Information -> USB?
 
Joined
Sep 21, 2010
Messages
11
CPU
I3-6100U
Graphics
Intel HD 520
Mobile Phone
Android
After reading the guide, I discovered that the in built camera is detected wrongly.
I have checked with IORegistryExplorer and it was detected as USB2.0-CRW.
Does it means that my camera is not supported?
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
191,134
Motherboard
Intel DH67BL
CPU
Core i7-2600K
Graphics
Intel HD 3000
Mac
MacBook Air
Mobile Phone
iOS
After reading the guide, I discovered that the in built camera is detected wrongly.
I have checked with IORegistryExplorer and it was detected as USB2.0-CRW.
Does it means that my camera is not supported?
"USB2.0-CRW" is likely your internal card reader, not camera.
 
Joined
Sep 21, 2010
Messages
11
CPU
I3-6100U
Graphics
Intel HD 520
Mobile Phone
Android
Oh, sorry for the mix up.
Thanks for confirming with me.
 
Joined
Apr 7, 2017
Messages
1
Hello. I am trying to to hack my Inspiron 11 3000 as well and while attempting to boot into high sierra install through unibeast, it gets stuck on

'OsxAptioFix2Drv: Starting overrides for \. IABootFiles\boot.efi
Using reloc block: no, hibernate wake: no
+++++++++++++++++++++++++++++++++++++
_ '

and it just sits there, nothing happens. How were you able to get OSX installed on this laptop?
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
191,134
Motherboard
Intel DH67BL
CPU
Core i7-2600K
Graphics
Intel HD 3000
Mac
MacBook Air
Mobile Phone
iOS
Hello. I am trying to to hack my Inspiron 11 3000 as well and while attempting to boot into high sierra install through unibeast, it gets stuck on

'OsxAptioFix2Drv: Starting overrides for \. IABootFiles\boot.efi
Using reloc block: no, hibernate wake: no
+++++++++++++++++++++++++++++++++++++
_ '

and it just sits there, nothing happens. How were you able to get OSX installed on this laptop?
Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capitan-laptop-support/164990-faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capitan-laptop-support/164990-faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"
 

Top