Contribute
Register

Dell 7559 - Bios 1.2.7 Update !

Status
Not open for further replies.
Shubham17 said:
Okay so I extracted ACPI origin files wile on the new BIOS, downgraded BIOS, managed to boot into macOS using files from https://www.tonymacx86.com/threads/guide-dell-inspiron-15-7559-sierra-high-sierra-install.201576/ I then patched the ACPI files I extracted earlier and made my new USB, reinstalled the new BIOS and I was able to boot, however, only with Legacy enabled. With legacy disabled I still face the issue from post #6. I have attached problem reporting files.
Click to expand...

Any change in BIOS options requires re-extract/re-patch.
You should use a USB stick to boot in the case your ACPI/patched content is out-of-sync with native (eg. USB should have no patched ACPI). Then no need to jump around to different versions of BIOS.
 
SgtRoswell said:
It does not have any patch except spoof ssdt as I have reiterated a couple of times.

The files I have attached are from my ssd.
Click to expand...

Problem reporting files must represent the actual scenario you are testing.
Again, if you attached the wrong files, you will need to attach correct files.
Attaching EFI/Clover from SSD when you're actually booting from USB implies "wrong files".
The files you attach must accurately represent what you're doing.
 
SgtRoswell said:
None of above worked. Please note that i am applying it to my ssd as I cant seem to access efi on my vanilla usb.
Click to expand...

If your USB is GPT, you must mount EFI on it manually (with 'diskutil mount').
It is why most would choose to create the USB with MBR partitioning...
 
RehabMan said:
Any change in BIOS options requires re-extract/re-patch.
You should use a USB stick to boot in the case your ACPI/patched content is out-of-sync with native (eg. USB should have no patched ACPI). Then no need to jump around to different versions of BIOS.
Click to expand...
now that I can actually boot I will re-extract and re-patch, thank you for the help everyone!
 
Progress:
A repatched the ACPI and now everything seems to work fine.
I had to switch to MBP 11,2 SMBIOS (from 11,1) in order to get the CPU working properly (boost to 3,5 Ghz). With 11,1 I wasn`t able to fix it - I tried all methods described in laptop SSDT patching guide.

Issue:
The last issue I have is this error report/KP (code below) after each boot. It happens with both SMBIOSes I tried.
Does anybody know what is the cause?

Code: 
Anonymous UUID:       B59FEA85-781B-1F6B-CBDC-A3821BE289B1

Sat Jan  6 15:38:55 2018

*** Panic Report ***
panic(cpu 2 caller 0xffffff8017bcedd3): Kernel trap at 0xffffff7f9940ddaf, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000002c95f000, CR4: 0x00000000003627e0
RAX: 0x0000000000000001, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff82117f3b70, RBP: 0xffffff82117f3c10, RSI: 0xffffff7f997a8694, RDI: 0x0000000000000000
R8:  0xffffff82117f3c98, R9:  0x0000000000000074, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff7f997a8694, R14: 0xffffff81c7178000, R15: 0xffffff7f997a8694
RFL: 0x0000000000010282, RIP: 0xffffff7f9940ddaf, CS:  0x0000000000000008, SS:  0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x2, PL: 0

Backtrace (CPU 2), Frame : Return Address
0xffffff82117f3800 : 0xffffff8017adab52
0xffffff82117f3880 : 0xffffff8017bcedd3
0xffffff82117f3a60 : 0xffffff8017becca3
0xffffff82117f3a80 : 0xffffff7f9940ddaf
0xffffff82117f3c10 : 0xffffff7f9933f323
0xffffff82117f3c70 : 0xffffff7f993365ad
0xffffff82117f3d20 : 0xffffff7f99333c90
0xffffff82117f3db0 : 0xffffff7f9933343d
0xffffff82117f3de0 : 0xffffff80180b6818
0xffffff82117f3e50 : 0xffffff7f9933420a
0xffffff82117f3e80 : 0xffffff801809264d
0xffffff82117f3ec0 : 0xffffff8018091f16
0xffffff82117f3f30 : 0xffffff801808cbea
0xffffff82117f3f70 : 0xffffff8018092dec
0xffffff82117f3fb0 : 0xffffff8017bc9507
      Kernel Extensions in backtrace:
         com.apple.driver.AirPort.Brcm4360(1040.1.1a6)[3CE7CF24-B256-3A0A-9FC2-5D7CCEF683B4]@0xffffff7f9931e000->0xffffff7f999dffff
            dependency: com.apple.driver.corecapture(1.0.4)[B686A801-B3AA-3BD5-AAC1-4F35F17D1D7D]@0xffffff7f9920f000
            dependency: com.apple.driver.mDNSOffloadUserClient(1.0.1b8)[5262E7F8-D85C-336F-B5BF-0518D486FC32]@0xffffff7f99239000
            dependency: com.apple.iokit.IO80211Family(1110.26)[043624F6-5979-30C5-A90D-482A5FA74911]@0xffffff7f99241000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[CD762868-D3F5-3463-A60E-E3B41C9CC0D1]@0xffffff7f98316000
            dependency: com.apple.iokit.IONetworkingFamily(3.2)[848B398F-4D96-3024-8092-6CD3534D2CCA]@0xffffff7f988e9000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 nv_disable=1 kext-dev-mode=1

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 15.6.0: Sun Jun  4 21:43:07 PDT 2017; root:xnu-3248.70.3~1/RELEASE_X86_64
Kernel UUID: B370DB23-7244-3441-B95D-384442442565
Kernel slide:     0x0000000017800000
Kernel text base: 0xffffff8017a00000
__HIB  text base: 0xffffff8017900000
System model name: MacBookPro11,1 (Mac-189A3D4F975D5FFC)

System uptime in nanoseconds: 1686487970
last loaded kext at 1504361198: com.apple.driver.usb.AppleUSBHub    1.0.1 (addr 0xffffff7f98c7e000, size 192512)
loaded kexts:
com.insanelymac.RealtekRTL8111    2.1.0d1
org.rehabman.driver.FakePCIID    1.2.4
org.emlydinesh.driver.ApplePS2Keyboard    4.5
org.emlydinesh.driver.ApplePS2Controller    4.5
org.netkas.driver.FakeSMC    1394
org.rehabman.driver.AppleSmartBatteryManager    1.60.5
com.rehabman.driver.USBInjectAll    0.5.10
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0
com.apple.BootCache    38
com.apple.driver.AirPort.Brcm4360    1040.1.1a6
com.apple.driver.AppleAHCIPort    3.1.8
com.apple.driver.AppleACPIButtons    4.0
com.apple.driver.AppleACPIEC    4.0
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleAPIC    1.7
com.apple.nke.applicationfirewall    163
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.driver.usb.AppleUSBHub    1.0.1
com.apple.iokit.IO80211Family    1110.26
com.apple.driver.mDNSOffloadUserClient    1.0.1b8
com.apple.driver.corecapture    1.0.4
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOUSBFamily    900.4.1
com.apple.iokit.IOAHCIFamily    2.8.1
com.apple.driver.usb.AppleUSBXHCIPCI    1.0.1
com.apple.driver.usb.AppleUSBXHCI    1.0.1
com.apple.iokit.IOUSBHostFamily    1.0.1
com.apple.driver.AppleUSBHostMergeProperties    1.0.1
com.apple.driver.AppleEFINVRAM    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.driver.AppleEFIRuntime    2.0
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.DiskImages    417.4
com.apple.iokit.IOStorageFamily    2.1
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    4.0
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.pthread    1
com.apple.kec.corecrypto    1.0
com.apple.kec.Libm    1
Model: MacBookPro11,2, BootROM MBP112.0142.B00, 4 processors, Intel Core i7, 2,59 GHz, 16 GB, SMC 2.18f15
Graphics: Intel HD Graphics 530, Intel HD Graphics 530, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, Samsung, M471B1G73QH0-YK0
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, Corsair, CMSO8GX3M1C1600C11
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x19), Broadcom BCM43xx 1.0 (7.21.95.175.1a6)
Bluetooth: Version 4.4.6f1 17910, 3 services, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Samsung SSD 850 EVO M.2 250GB, 250,06 GB
Serial ATA Device: ST1000LM014-1EJ164, 1 TB
USB Device: USB 3.0 Bus
USB Device: BCM20702A0
USB Device: Integrated_Webcam_HD
USB Device: USB2.0 Hub
USB Device: Game Mouse
USB Device: Steinberg UR22
USB Device: USB Receiver
Thunderbolt Bus:
 

Attachments

  • CLOVER.zip
    1.7 MB · Views: 72
  • ioreg.ioreg
    6.9 MB · Views: 124
  • Screen Shot 2018-01-06 at 15.34.08.png
    Screen Shot 2018-01-06 at 15.34.08.png
    73.6 KB · Views: 143
Johnnnnnnnnnny said:
Progress:
A repatched the ACPI and now everything seems to work fine.
I had to switch to MBP 11,2 SMBIOS (from 11,1) in order to get the CPU working properly (boost to 3,5 Ghz). With 11,1 I wasn`t able to fix it - I tried all methods described in laptop SSDT patching guide.

Issue:
The last issue I have is this error report/KP (code below) after each boot. It happens with both SMBIOSes I tried.
Does anybody know what is the cause?

Code: 
Anonymous UUID:       B59FEA85-781B-1F6B-CBDC-A3821BE289B1

Sat Jan  6 15:38:55 2018

*** Panic Report ***
panic(cpu 2 caller 0xffffff8017bcedd3): Kernel trap at 0xffffff7f9940ddaf, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000002c95f000, CR4: 0x00000000003627e0
RAX: 0x0000000000000001, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff82117f3b70, RBP: 0xffffff82117f3c10, RSI: 0xffffff7f997a8694, RDI: 0x0000000000000000
R8:  0xffffff82117f3c98, R9:  0x0000000000000074, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff7f997a8694, R14: 0xffffff81c7178000, R15: 0xffffff7f997a8694
RFL: 0x0000000000010282, RIP: 0xffffff7f9940ddaf, CS:  0x0000000000000008, SS:  0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x2, PL: 0

Backtrace (CPU 2), Frame : Return Address
0xffffff82117f3800 : 0xffffff8017adab52
0xffffff82117f3880 : 0xffffff8017bcedd3
0xffffff82117f3a60 : 0xffffff8017becca3
0xffffff82117f3a80 : 0xffffff7f9940ddaf
0xffffff82117f3c10 : 0xffffff7f9933f323
0xffffff82117f3c70 : 0xffffff7f993365ad
0xffffff82117f3d20 : 0xffffff7f99333c90
0xffffff82117f3db0 : 0xffffff7f9933343d
0xffffff82117f3de0 : 0xffffff80180b6818
0xffffff82117f3e50 : 0xffffff7f9933420a
0xffffff82117f3e80 : 0xffffff801809264d
0xffffff82117f3ec0 : 0xffffff8018091f16
0xffffff82117f3f30 : 0xffffff801808cbea
0xffffff82117f3f70 : 0xffffff8018092dec
0xffffff82117f3fb0 : 0xffffff8017bc9507
      Kernel Extensions in backtrace:
         com.apple.driver.AirPort.Brcm4360(1040.1.1a6)[3CE7CF24-B256-3A0A-9FC2-5D7CCEF683B4]@0xffffff7f9931e000->0xffffff7f999dffff
            dependency: com.apple.driver.corecapture(1.0.4)[B686A801-B3AA-3BD5-AAC1-4F35F17D1D7D]@0xffffff7f9920f000
            dependency: com.apple.driver.mDNSOffloadUserClient(1.0.1b8)[5262E7F8-D85C-336F-B5BF-0518D486FC32]@0xffffff7f99239000
            dependency: com.apple.iokit.IO80211Family(1110.26)[043624F6-5979-30C5-A90D-482A5FA74911]@0xffffff7f99241000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[CD762868-D3F5-3463-A60E-E3B41C9CC0D1]@0xffffff7f98316000
            dependency: com.apple.iokit.IONetworkingFamily(3.2)[848B398F-4D96-3024-8092-6CD3534D2CCA]@0xffffff7f988e9000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 nv_disable=1 kext-dev-mode=1

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 15.6.0: Sun Jun  4 21:43:07 PDT 2017; root:xnu-3248.70.3~1/RELEASE_X86_64
Kernel UUID: B370DB23-7244-3441-B95D-384442442565
Kernel slide:     0x0000000017800000
Kernel text base: 0xffffff8017a00000
__HIB  text base: 0xffffff8017900000
System model name: MacBookPro11,1 (Mac-189A3D4F975D5FFC)

System uptime in nanoseconds: 1686487970
last loaded kext at 1504361198: com.apple.driver.usb.AppleUSBHub    1.0.1 (addr 0xffffff7f98c7e000, size 192512)
loaded kexts:
com.insanelymac.RealtekRTL8111    2.1.0d1
org.rehabman.driver.FakePCIID    1.2.4
org.emlydinesh.driver.ApplePS2Keyboard    4.5
org.emlydinesh.driver.ApplePS2Controller    4.5
org.netkas.driver.FakeSMC    1394
org.rehabman.driver.AppleSmartBatteryManager    1.60.5
com.rehabman.driver.USBInjectAll    0.5.10
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0
com.apple.BootCache    38
com.apple.driver.AirPort.Brcm4360    1040.1.1a6
com.apple.driver.AppleAHCIPort    3.1.8
com.apple.driver.AppleACPIButtons    4.0
com.apple.driver.AppleACPIEC    4.0
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleAPIC    1.7
com.apple.nke.applicationfirewall    163
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.driver.usb.AppleUSBHub    1.0.1
com.apple.iokit.IO80211Family    1110.26
com.apple.driver.mDNSOffloadUserClient    1.0.1b8
com.apple.driver.corecapture    1.0.4
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOUSBFamily    900.4.1
com.apple.iokit.IOAHCIFamily    2.8.1
com.apple.driver.usb.AppleUSBXHCIPCI    1.0.1
com.apple.driver.usb.AppleUSBXHCI    1.0.1
com.apple.iokit.IOUSBHostFamily    1.0.1
com.apple.driver.AppleUSBHostMergeProperties    1.0.1
com.apple.driver.AppleEFINVRAM    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.driver.AppleEFIRuntime    2.0
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.DiskImages    417.4
com.apple.iokit.IOStorageFamily    2.1
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    4.0
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.pthread    1
com.apple.kec.corecrypto    1.0
com.apple.kec.Libm    1
Model: MacBookPro11,2, BootROM MBP112.0142.B00, 4 processors, Intel Core i7, 2,59 GHz, 16 GB, SMC 2.18f15
Graphics: Intel HD Graphics 530, Intel HD Graphics 530, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, Samsung, M471B1G73QH0-YK0
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, Corsair, CMSO8GX3M1C1600C11
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x19), Broadcom BCM43xx 1.0 (7.21.95.175.1a6)
Bluetooth: Version 4.4.6f1 17910, 3 services, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Samsung SSD 850 EVO M.2 250GB, 250,06 GB
Serial ATA Device: ST1000LM014-1EJ164, 1 TB
USB Device: USB 3.0 Bus
USB Device: BCM20702A0
USB Device: Integrated_Webcam_HD
USB Device: USB2.0 Hub
USB Device: Game Mouse
USB Device: Steinberg UR22
USB Device: USB Receiver
Thunderbolt Bus:
Click to expand...

Check to see if the system uptime number is changing:
Code: 
System uptime in nanoseconds: 1686487970

If not, then it is the same panic reported again, which indicates an NVRAM implementation problem.
Maybe you are using EmuVariable but forgot the "RC scripts".
 
RehabMan said:
Check to see if the system uptime number is changing:
Code: 
System uptime in nanoseconds: 1686487970

If not, then it is the same panic reported again, which indicates an NVRAM implementation problem.
Maybe you are using EmuVariable but forgot the "RC scripts".
Click to expand...

Yes - it is still the same and I am using EmuVariable. Can you please point me where to start looking about the "RC scripts" problem?

Also I`m not sure which of theese drivers I really need. On the old install I had just:
Code: 
EmuVariableUefi-64.efi
FSInject-64.efi
HFSPlus.efi
OsxAptioFix2Drv-64.efi
 

Attachments

  • Screen Shot 2018-01-06 at 17.59.50.png
    Screen Shot 2018-01-06 at 17.59.50.png
    60.3 KB · Views: 112
Johnnnnnnnnnny said:
Yes - it is still the same and I am using EmuVariable. Can you please point me where to start looking about the "RC scripts" problem?
Click to expand...

RC scripts are available from the Clover installer.
They are required for EmuVariableUefi-64.efi to work correctly.
 
RehabMan said:
Problem reporting files must represent the actual scenario you are testing.
Again, if you attached the wrong files, you will need to attach correct files.
Attaching EFI/Clover from SSD when you're actually booting from USB implies "wrong files".
The files you attach must accurately represent what you're doing.
Click to expand...


So I have brought real mac from office and created a new fresh installation usb with Rehabman's updated clover and guide of course.

Trying to boot to the installer but still the same error! Attaching clover with F2 and F4.
 

Attachments

  • Clover.zip
    1.6 MB · Views: 69
  • IMG_0199.jpg
    IMG_0199.jpg
    2.1 MB · Views: 106
SgtRoswell said:
So I have brought real mac from office and created a new fresh installation usb with Rehabman's updated clover and guide of course.

Trying to boot to the installer but still the same error! Attaching clover with F2 and F4.
Click to expand...

Dell computers often require config.plist/KernelAndKextPatches/DellSMBIOSPatch=true.
You have it set false.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top