Dell 7460 - Restart in middle of boot for install High Sierra

[snice]

Hello!

I'm trying to do my first Hackintosh, but when I boot on USB Clover Boot, I choose to Install macOS, then the apple logo appears and everytime that loading reach middle, the laptop reboots.

I trying do the same thing with verbose mode to take a shoot of the screen and attech here.

I'm using this guide from cagalindo: https://www.tonymacx86.com/threads/guide-dell-inspiron-14-7460-series-7000-uefi-hotpatch.236039/
(I replaced my Wireless Card as the guide instruct and set all the same Bios configuration)

I'm follow all steps from Clover Guide from RehabMan too: https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

I don't know if my config.plis is correct for my laptop (I used from RehabMan, Intel 620), and I don't know if the kexts and drivers64uefi are all right. So I attached my CLOVER folder from USB here too.

Can anyone help me?!

(Verbose 4 pic is illegible because it was too fast before restarting)

PS.: Sorry my bad english, I from Brazil and dont know write/speak well...

My laptop specs are:
Display: 14" in Full HD IPS TrueLife LED-backlit touchscreen (1920 x 1080)
Processor: Intel Core i5-7200U 2.5 GHz with Turbo Boost Technology up to 3.1 GHz, 3 MB Cache
Memory: 8GB DDR4 2400 MHz
Hard drive: 128GB SSD M2 (usually, comes with a 1TB HD)
Media drive: SD card reader (Does not report as a 'Card Reader' in SysInfo)
Audio: Waves MaxxAudio Pro (Realtek ALC256)
Video: Intel HD Graphics 620 and NVIDIA 940MX
Ports: 2 USB 3.0 • 1 USB 2.0 • 1 HDMI • Headphone output/Microphone input combo
Wireless: 802.11ac (Dell DW1560)
Ethernet: RTL8111

 

[RehabMan]

Hello!

I'm trying to do my first Hackintosh, but when I boot on USB Clover Boot, I choose to Install macOS, then the apple logo appears and everytime that loading reach middle, the laptop reboots.

I trying do the same thing with verbose mode to take a shoot of the screen and attech here.

I'm using this guide from cagalindo: https://www.tonymacx86.com/threads/guide-dell-inspiron-14-7460-series-7000-uefi-hotpatch.236039/
(I replaced my Wireless Card as the guide instruct and set all the same Bios configuration)

I'm follow all steps from Clover Guide from RehabMan too: https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

I don't know if my config.plis is correct for my laptop (I used from RehabMan, Intel 620), and I don't know if the kexts and drivers64uefi are all right. So I attached my CLOVER folder from USB here too.

Can anyone help me?!

(Verbose 4 pic is illegible because it was too fast before restarting)

PS.: Sorry my bad english, I from Brazil and dont know write/speak well...

My laptop specs are:
Display: 14" in Full HD IPS TrueLife LED-backlit touchscreen (1920 x 1080)
Processor: Intel Core i5-7200U 2.5 GHz with Turbo Boost Technology up to 3.1 GHz, 3 MB Cache
Memory: 8GB DDR4 2400 MHz
Hard drive: 128GB SSD M2 (usually, comes with a 1TB HD)
Media drive: SD card reader (Does not report as a 'Card Reader' in SysInfo)
Audio: Waves MaxxAudio Pro (Realtek ALC256)
Video: Intel HD Graphics 620 and NVIDIA 940MX
Ports: 2 USB 3.0 • 1 USB 2.0 • 1 HDMI • Headphone output/Microphone input combo
Wireless: 802.11ac (Dell DW1560)
Ethernet: RTL8111

Probably DVMT-prealloc related.
Use invalid ig-platform-id, just as recommended in the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[snice]

Probably DVMT-prealloc related.
Use invalid ig-platform-id, just as recommended in the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Sorry, I read this in the FAQ but I did not understand it very well. Anyway I did what you said and it worked.

However in the end of the installation it said that it was not possible to install on my computer and gave an error log. The log is attached.

Could you help me with that too?

 

[RehabMan]

Sorry, I read this in the FAQ but I did not understand it very well. Anyway I did what you said and it worked.

However in the end of the installation it said that it was not possible to install on my computer and gave an error log. The log is attached.

Could you help me with that too?

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/