DanRamone First Build > ASUS MAXIMUS X HERO - i7-8700K - Radeon Sapphire rx560

[HackinMax]

Is the Broadcom BCM-94360CS2 adapter the stock Wifi/BT adapter on the Max X Hero?
I cannot seem to locate a definitive answer on whether (and with WHAT) I need to replace the stock adapter in my build - or not. (I'm in the procurement stages of the build)

Thanks

EDIT: I only just realized that I am asking the wrong question of the wrong board. I now see the your WiFi/BT card is assigned to slot 3 and, therefore is NOT a stock feature. And, to add insult to injury, I do not see how to delete a post here. Apologies.

 

[Lynx72]

Hi guys...
I need your help!!
These are nights I don't sleep...
I'm going crazy!!
I can't understand where I'm wrong...
After creating the USB installer and properly configuring the BIOS (literally following your guide), I restart the PC. The Apple appears and the progress bar below. But, at 1/3, the PC is reboot. (I used your pre packaged EFI.)
Even at the hardware level, I did the following tests WITHOUT success:
- disconnect the USB cable from the Corsair Hi150 pump,
- booting the installer with the 2 memory banks in position A1 and A2 (normally they are in A2 and B2),
- use the USB 2.0 ports for the USB installer.
I do not know what to do...

Is it possible that my RAM is incompatible with HACKINTOSH?
This is my configuration:
- Mainboard: Asus Rog Maximus X Code
- CPU: Intel i7-8700K
- Cooler: Corsair H150i PRO
- RAM: 2 x Crucial Ballistix Elite 8GB Ddr4 2666 8Gb (BLE8G4D26AFEA)
- HD: Samsung 960Evo M2 Nvme (with windows 10 and I don't want to involve it)
- HD: Samsung 850Evo SSD SATA (HERE I WOULD LIKE TO INSTALL HACKINTOSH!!)
- HD: Seagate SATA 2TB + Intel Optane Series 32GB SSD on M.2 slot
- DVD-RW: iHAS 124 b
- NO other dedicated card like video, audio, wifi, etc. I ONLY USE THOSE ONBOARD !!
- Monitor: MSI Optix MAG27CQ

I hope you can help me!!!
Many thanks in advance...