Crash Instalation Snow Leopard on hp 8200 SFF i5 asus en210

[leonv]

HI, please i have
hp 8200 SFF i5 2500
asus en210
HDD 500GB
RAM 16 GB
1394cardbios 2.32ver ahci mode, lpt disable.
DVI port conected to monitor
Iboot3.3
DVD Snoe Leopard 10.6.3
I have problem with instalation. I read the instructions
https://www.tonymacx86.com/threads/guide-install-snow-leopard-on-the-hp-6200-8200-desktop-pc.235154/
Installation does not continue. I tried the parameters -v, -x, -v -f, -x -f, -v -f GraphicsEnabler=yes, -v -f GraphicsEnabler=no
The files are loaded, but then the disk utility is not available.
Instalation freeze.
Please can you help me with the solution?
Thank you

 

[P1LGRIM]

I tried the parameters -v, -x, -v -f, -x -f, -v -f GraphicsEnabler=yes, -v -f GraphicsEnabler=no

Boot flags are case sensitive, if you get them wrong they have no effect.
GraphicsEnabler=yes should be GraphicsEnabler=Yes.
GraphicsEnabler=no should be GraphicsEnabler=No.

 

[leonv]

Boot flags are case sensitive, if you get them wrong they have no effect.
GraphicsEnabler=yes should be GraphicsEnabler=Yes.
GraphicsEnabler=no should be GraphicsEnabler=No.

Thx for your Reply
The installation continued only with -v -f GraphicsEnabler=No
Restart and reboot Work with -v -f GraphicsEnabler=No only TO.
I have 4x4GB RAM in slots, but total RAM is 4GB ONLY and en210 is not detect in system. Monitor have bad image resolution.
I have 10.6.3 now.
Please, give me an advice. I have to use multibeast or update to 10.6.8. first?
Which drivers do I install? Have i the correct version of Iboot 3.3 for procesor and ram?

 

[P1LGRIM]

Please, give me an advice. I have to use multibeast or update to 10.6.8. first?

I have never done it, the instructions say :

1. Purchase Snow Leopard Retail DVD
2. Use iBoot + MultiBeast to install Snow Leopard
3. Update to Snow Leopard 10.6.8

http://support.apple.com/kb/DL1399

Have i the correct version of Iboot 3.3 for procesor and ram?

If it boots your system then it is probably ok.

 

[leonv]

I have never done it, the instructions say :


If it boots your system then it is probably ok.

Thank you for the advice.
First installation -v -f GraphicsEnabler = No has failed after installing updatehelper. Total crash.
Second installation (with GraphicsEnabler = No only) worked on a second attempt. Then I'm installing Multibeast and kext nvidia en210 + updatehelper.
All kext detect en210 but work with 1024x768 resolution. Cuda driver not work to.
After restart I'm installing update 10.6.8 + driver nvidia Retail_256.02.25f1v1. Driver work perfect(FHD) but on 10.6.8 only.

Iboot 3.3 have maxmem=4096(on picture).
I have hdd 1TB and bootloader not work on HDD.
Normal boot from USB work absolutely excellent, all components work, full RAM(16GB) detected. Your Guide is perfect
https://tonymacx86.blogspot.com/2009/11/create-chameleon-boot-usb-drive.html
Thank you.