- Joined
- Jan 12, 2019
- Messages
- 13
- Motherboard
- MSI Bazooka H370m
- CPU
- i7-8700
- Graphics
- RX 580
- Mac
- Mobile Phone
Ok
So I got this strange issue happening
got Mojave installer to boot using unibeast 9.2 (clover 4920)
Installed Mojave
Installed clover through multibeast
When I boot from the main drive I keep getting : error 0x118e couldn’t allocate runtime area
I get it with both : Samsung 970 Pro and Sabrent Rocket drive PCI-e 3
I have installed only the necessary kexts using the hack tool ( following this guide ->https://www.tonymacx86.com/threads/...m-bazooka-vega-56-catalina-compatible.266512/ )
Troubleshooting steps I’ve tried:
starting from this guide —>https://www.tonymacx86.com/threads/solved-couldnt-allocate-runtime-area.226891/
I have read all the threads I could find on this and other forums, regarding the stated error and tried all the proposed solutions
Tried each variant of OSXaptiofix, including the free-2000
Tried the above steps on BIOS V1, V12 and V17
Tried clover version with emulated nvram 4961
Tried customised version of clover 5071
Tried switching Ram Sticks
Tried with a Samsung 860 SATA SSD
Tried removing the WiFi card
Tried the recommended BIOS settings in both these threads :
results are always the same
booting the system using the unibeast key works
booting the system from the main drive doesn’t
I ‘even tried updating clover on the unibeast key and it works !
which is crazy !
I’ve also tried creating a Catalina usb installer but it gets stuck with the same exact error.
Tried Slide 0
Tried disabling IGPU
Is there a way I could troubleshoot the clover bootloader ?
Or is there another way I can troubleshoot this installer ?
So I got this strange issue happening
got Mojave installer to boot using unibeast 9.2 (clover 4920)
Installed Mojave
Installed clover through multibeast
When I boot from the main drive I keep getting : error 0x118e couldn’t allocate runtime area
I get it with both : Samsung 970 Pro and Sabrent Rocket drive PCI-e 3
I have installed only the necessary kexts using the hack tool ( following this guide ->https://www.tonymacx86.com/threads/...m-bazooka-vega-56-catalina-compatible.266512/ )
Troubleshooting steps I’ve tried:
starting from this guide —>https://www.tonymacx86.com/threads/solved-couldnt-allocate-runtime-area.226891/
I have read all the threads I could find on this and other forums, regarding the stated error and tried all the proposed solutions
Tried each variant of OSXaptiofix, including the free-2000
Tried the above steps on BIOS V1, V12 and V17
Tried clover version with emulated nvram 4961
Tried customised version of clover 5071
Tried switching Ram Sticks
Tried with a Samsung 860 SATA SSD
Tried removing the WiFi card
Tried the recommended BIOS settings in both these threads :
[Stable] Nicoras' Mac: H370M Bazooka + Vega 56 | OpenCore-based
MSI-H370M-BAZOOKA - MSI Vega 56 Air Boost Compatible with Mojave and Catalina Components * Orange items are interoperable, meaning that you can decide on getting another model/brand of that component. MSI H370M BAZOOKA mATX Motherboard - BHPhotoVideo / Amazon / Newegg Intel Core i5-8400...
www.tonymacx86.com
[SUCCESS] Portable Desktop: i7 8086K - MSI H370M Bazooka - 2 Radeon RX580 - NVMe PCIe M.2 Startup
Portable Desktop Build: i7 8086K, MSI H370M Bazooka, 2 Radeon RX580 & Adata NVMe PCIe M.2 Component MSI H370M Bazooka mATX Motherboard - MSI Bios Version (compatible): 7B24v22 https://www.amazon.com/dp/B07BZ4GC1G/ https://www.newegg.com/global/id-en/p/N82E16813144161?tag=tonymacx86com-20...
www.tonymacx86.com
results are always the same
booting the system using the unibeast key works
booting the system from the main drive doesn’t
I ‘even tried updating clover on the unibeast key and it works !
which is crazy !
I’ve also tried creating a Catalina usb installer but it gets stuck with the same exact error.
Tried Slide 0
Tried disabling IGPU
Is there a way I could troubleshoot the clover bootloader ?
Or is there another way I can troubleshoot this installer ?