- Joined
- May 3, 2012
- Messages
- 151
- Motherboard
- Gigabyte X79-UD3
- CPU
- i7 X9730k
- Graphics
- Nvidia GeForce GTX670 OC
- Mac
- Classic Mac
- Mobile Phone
Core i7-3970X Monster SSD Build, Geekbench Score: 20313
I went ahead and replaced my DSDT with yours and replaced my .plist with yours. I am still not able to complete any installer as all installer screens look like the attached and error at the final install screen.
I have tried removing RAM sticks (to see if it's an individual RAM stick issue), I've order an RMA motherboard that will arrive next week (because the rear USB3.0 ports weren't working, and they run off the same controller as the front ones, which were working, I figured it was a mobo issue. BUT now with the rear USB3.0 ports working I have no idea what the problem is), and have even physically threatened the computer.
I am trying a fresh install but it won't push through to the installation screen. My flag was GraphicsEnabler=No -v and it freezes on [PCI configuration begin] (I was going to hold off on a fresh install as I have a 3x2TB RAID0 soft array inside that I would prefer not to lose (I have it backed up but still...) and if I were to do a fresh install it is my understanding that I would lose the array.)
Any thoughts.
Thanks gx!
Should I install the DSDT through MB (setting it on the harddrive) or just replace the DSDT that is in my extra folder? The issue that I am working with right now is that I am unable to install any third party plugins; which is strange. That being said the rear USB3.0 port is misteriously working again, so I want to install memtest to rule out a memory issue.
I went ahead and replaced my DSDT with yours and replaced my .plist with yours. I am still not able to complete any installer as all installer screens look like the attached and error at the final install screen.
I have tried removing RAM sticks (to see if it's an individual RAM stick issue), I've order an RMA motherboard that will arrive next week (because the rear USB3.0 ports weren't working, and they run off the same controller as the front ones, which were working, I figured it was a mobo issue. BUT now with the rear USB3.0 ports working I have no idea what the problem is), and have even physically threatened the computer.
I am trying a fresh install but it won't push through to the installation screen. My flag was GraphicsEnabler=No -v and it freezes on [PCI configuration begin] (I was going to hold off on a fresh install as I have a 3x2TB RAID0 soft array inside that I would prefer not to lose (I have it backed up but still...) and if I were to do a fresh install it is my understanding that I would lose the array.)
Any thoughts.
Thanks gx!