Compatibility revision, help and advice

[robertolosada]

I am planning to do my first hackintosh, I am planning on the following:

• i5-9600k
• Noctua NH-U12S
• Gigabyte Aorus Z390 Pro Wifi
• Corsair Vengeance LPX DDR4 3200 2x8GB
• Samsung 970 EVO Plus 500GB SSD (for MacOs Mojave)
• Samsung 970 EVO Plus 250GB SSD (for Windows 10)
• Seagate BarraCuda 3.5" 1TB SATA3 (for general store for windows or macos)
• Sapphire Pulse Radeon RX 580 8GB GDDR5
• Corsair CX650M 650W 80 Plus Bronce
• Aerocool Cylon Pro

- I do not know if there would be any issue if I install a Fenvi T919, link to aliexpress, (includes BCM94360CD) to get wifi and bluetooth to work in MacOs Mojave. I've read that the native WIFI/BT of the motherboard doesn't work on MacOs

- Would it be possible to use the partition the seagate disk in order to use each partition for each operative system?

- I have checked at online power supply calculator and the voltage recommended was less than 600W so I think that 650W power supply will be enough?

- I would like to change the Samsung 970 EVO Plus 250GB SSD (for Windows) for another cheaper disk that is compatible with the motherboard (working on that).
I have attached the compatible motherboard m.2 disks list.

 

[antieatingactivist]

I use the Fenvi card and it fully works right away with no problems. Onboard bluetooth and wifi is generally a no-go.

Yes you can partition the disk. Another option is to use Fat32, which the Mac can read and write. You can also do any number of native partitions you need. Use GUID partition table.

That power supply is more than enough.

You should be able to use any m.2 disk regardless if it's on that list or not.