- Joined
- May 31, 2016
- Messages
- 3
Hey guys. This is my first Hackintosh, so please excuse this if it's a really newbie question. I haven't been able to figure it out after reading a bunch of threads. I installed 10.11.5 with the latest versions of Unibeast and Multibeast and was able to get everything working properly (including ethernet and audio), but sleep isn't quite working as expected. The computer goes to sleep normally (both automatically and by initiating it through the menu), but then when I hit the power button to wake it up, it goes back through the Clover boot process, and all programs are restarting as if they crashed. Any help would be greatly appreciated.
Here's a boot log from Clover configurator.
And here's my config.plist
Here's a boot log from Clover configurator.
Code:
0:100 0:100 MemLog inited, TSC freq: 3400001970
0:100 0:000 LegacyRegion2: Chipset/proc: 0x0C008086
0:100 0:000 Next Generation Core processors (PAM 0x80-0x86)
0:100 0:000 Test PAM1=(0x41=90, 0x5a=10, 0x81=11, 0x91=00) at chipset 0C008086
0:100 0:000 , Install = Success
0:109 0:009 BiosVideoDriverBindingStart!
0:109 0:000 BiosVideoCheckForVbe
0:109 0:000 EdidOverride not found
0:122 0:012 Edid1+
0:122 0:000 found Detail Timing 1920x1080
0:134 0:012 Edid0+
0:134 0:000 found Detail Timing 1920x1080
0:134 0:000 ... already present
0:142 0:007 0 1280x1024 attr=9B - ok, edid+, working, highest, pref=0
0:148 0:005 1 1024x768 attr=9B - ok, edid+, 1024x768, working
0:150 0:001 2 640x480 attr=9B - ok, edid+, 640x480, working
0:154 0:003 3 800x600 attr=9B - ok, edid+, 800x600, working
0:165 0:011 4 1920x1080 attr=9B - ok, edid+, working, highest, pref=4
0:165 0:000 BV new mode: 4 1920x1080
0:352 0:186 SetMode pref 4 (4) = Success
1:678 1:325
1:678 0:000 Now is 13.6.2016, 16:50:2 (GMT)
1:678 0:000 Starting Clover rev 3423 on CLOVER EFI
1:678 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,4EC2165A-B06C-43D6-A8C5-AE1BABA0484E,0x28,0x64000) @C580C418
1:678 0:000 SelfDirPath = \EFI\CLOVER
1:678 0:000 Total Memory Slots Count = 4
1:678 0:000 Type 17 Index = 0
1:678 0:000 Ignoring insane frequency value 0MHz
1:678 0:000 SmbiosTable.Type17->Speed = 0MHz
1:678 0:000 SmbiosTable.Type17->Size = 0MB
1:678 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
1:678 0:000 Type 17 Index = 1
1:678 0:000 SmbiosTable.Type17->Speed = 1600MHz
1:678 0:000 SmbiosTable.Type17->Size = 8192MB
1:678 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
1:678 0:000 Type 17 Index = 2
1:678 0:000 Ignoring insane frequency value 0MHz
1:678 0:000 SmbiosTable.Type17->Speed = 0MHz
1:678 0:000 SmbiosTable.Type17->Size = 0MB
1:678 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
1:678 0:000 Type 17 Index = 3
1:678 0:000 SmbiosTable.Type17->Speed = 1600MHz
1:678 0:000 SmbiosTable.Type17->Size = 8192MB
1:678 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
1:678 0:000 Boot status=0
1:678 0:000 Clover revision: 3423 running on MS-7816
1:678 0:000 ... with board Z87-G43 GAMING (MS-7816)
1:678 0:000 CPU Vendor = 756E6547 Model=306C3
1:678 0:000 got cores from CPUID_1 = 0
1:678 0:000 The CPU supported turbo
1:678 0:000 BrandString = Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
1:678 0:000 MSR 0xE2 before patch 1E008400
1:678 0:000 MSR 0xE2 is locked, PM patches will be turned on
1:678 0:000 MSR 0xE4 00021814
1:678 0:000 MSR 0xCE 00080838_F3012200
1:678 0:000 non-usable FLEX_RATIO = 10000
1:678 0:000 corrected FLEX_RATIO = 0
1:678 0:000 FSBFrequency=100MHz DMIvalue=100000kHz
1:678 0:000 Corrected FSBFrequency=100MHz
1:678 0:000 Vendor/Model/Stepping: 0x756E6547/0x3C/0x3
1:678 0:000 Family/ExtFamily: 0x6/0x0
1:678 0:000 MaxDiv/MinDiv: 34.0/8
1:678 0:000 Turbo: 37/38/39/39
1:678 0:000 Features: 0xBFEBFBFF
1:678 0:000 Threads: 8
1:678 0:000 Cores: 4
1:678 0:000 FSB: 100 MHz
1:678 0:000 CPU: 3400 MHz
1:678 0:000 TSC: 3400 MHz
1:678 0:000 PIS: 400 MHz
1:678 0:000 PCI (00|00:00.00) : 8086 0C00 class=060000
1:678 0:000 PCI (00|00:02.00) : 8086 0412 class=030000
1:678 0:000 Found GFX model=Intel HD Graphics 4600
1:678 0:000 PCI (00|00:03.00) : 8086 0C0C class=040300
1:678 0:000 PCI (00|00:14.00) : 8086 8C31 class=0C0330
1:678 0:000 PCI (00|00:16.00) : 8086 8C3A class=078000
1:678 0:000 PCI (00|00:1A.00) : 8086 8C2D class=0C0320
1:678 0:000 PCI (00|00:1B.00) : 8086 8C20 class=040300
1:678 0:000 PCI (00|00:1C.00) : 8086 8C10 class=060400
1:678 0:000 PCI (00|00:1C.01) : 8086 8C12 class=060400
1:678 0:000 PCI (00|02:00.00) : 1969 E091 class=020000
1:678 0:000 LAN 0, Vendor=1969, MMIO=F7C00000
1:678 0:000 PCI (00|00:1C.03) : 8086 244E class=060401
1:678 0:000 PCI (00|03:00.00) : 1B21 1080 class=060400
1:678 0:000 PCI (00|00:1D.00) : 8086 8C26 class=0C0320
1:678 0:000 PCI (00|00:1F.00) : 8086 8C44 class=060100
1:678 0:000 PCI (00|00:1F.02) : 8086 8C02 class=010601
1:678 0:000 PCI (00|00:1F.03) : 8086 8C22 class=0C0500
1:678 0:000 Clover load options size = 0 bytes
1:681 0:002 Using OEM config.plist at path: EFI\CLOVER\config.plist
1:681 0:000 EFI\CLOVER\config.plist loaded: Success
1:682 0:001 Found theme directory: embedded
1:683 0:000 Found theme directory: random
1:684 0:000 Found theme directory: tonymacx86
1:686 0:001 Loading early settings
1:686 0:000 timeout set to 3
1:686 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
1:698 0:012 KextsToPatch: 5 requested
1:703 0:005 KextsToPatch 0: AppleHDAController (t1-HD4600_HDMI_Audio-1of2) Kext bin patch, data len: 5
1:723 0:019 KextsToPatch 1: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
1:742 0:018 KextsToPatch 2: AppleHDA (t1-10.11-AppleHDA/Realtek ALC...) Kext bin patch, data len: 4
1:760 0:018 KextsToPatch 3: AppleHDAController (t1-HD4600_HDMI_Audio-2of2) Kext bin patch, data len: 5
1:784 0:023 KextsToPatch 4: AppleHDA (t1-10.9-10.11-AppleHDA/Realtek ALC1150) Kext bin patch, data len: 4
1:804 0:019 Default theme: tonymacx86
1:809 0:004 Hiding entries with string Windows
1:814 0:004 Hiding entries with string \EFI\BOOT\BOOTX64.EFI
1:819 0:005 LoadDrivers() start
1:824 0:005 Loading FSInject-64.efi status=Success
1:840 0:015 LoadDrivers() end
1:844 0:004 SetScreenResolution: 1920x1080 - already set
1:858 0:013 Console modes reported: 4, available modes:
1:863 0:004 Mode 1: 80x25
1:867 0:004 Mode 2: 80x50
1:872 0:004 Mode 3: 100x31
1:877 0:005 Mode 4: 240x56 (current mode)
1:882 0:005 SetScreenResolution: 1920x1080 - already set
1:892 0:009 reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,4EC2165A-B06C-43D6-A8C5-AE1BABA0484E,0x28,0x64000)
1:898 0:005 ScanSPD() start
1:902 0:004 SMBus CmdReg: 0x3
1:907 0:004 Scanning SMBus [8086:8C22], mmio: 0xF7D19004, ioport: 0xF040, hostc: 0x11
1:916 0:008 Slots to scan [8]...
1:941 0:025 SPD[1]: Type 11 @0x51
1:952 0:011 Found module with XMP version 1.2DDR speed 1333MHz
1:962 0:009 Slot: 1 Type 24 8192MB 1333MHz Vendor=G Skill Intl PartNo=F3-1600C9-8GSR SerialNo=0000000000000000
1:987 0:025 SPD[3]: Type 11 @0x53
1:998 0:011 Found module with XMP version 1.2DDR speed 1333MHz
2:007 0:009 Slot: 3 Type 24 8192MB 1333MHz Vendor=G Skill Intl PartNo=F3-1600C9-8GSR SerialNo=0000000000000000
2:040 0:033 ScanSPD() end
2:046 0:006 Get Acpi Tables List from RSDT:
2:055 0:009 Found table: FACP A M I len=132
2:060 0:004 Found table: APIC A M I len=146
2:064 0:004 Found table: FPDT A M I len=68
2:069 0:005 Found table: ASF! HCG len=165
2:074 0:005 Found table: SSDT Cpu0Ist len=1337
2:079 0:004 Found table: SSDT CpuPm len=2776
2:084 0:004 Found table: MCFG A M I len=60
2:089 0:004 Found table: HPET A M I len=56
2:094 0:004 Found table: SSDT SataTabl len=877
2:103 0:008 Found table: SSDT SaSsdt len=13608
2:108 0:005 Found table: DMAR HSW len=184
2:113 0:004 Found table: SSDT IsctTabl len=2598
2:118 0:004 Calibrated TSC frequency =3400001970 =3400MHz
2:123 0:005 Loading main settings
2:128 0:004 Config set Fixes will override FixMask mask!
2:132 0:004 final mask=80009051
2:137 0:004 Config set ChassisType=0x6
2:142 0:004 found 7 volumes with blockIO
2:146 0:004 0. Volume:
2:156 0:009 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
2:161 0:005 Result of bootcode detection: bootable unknown (legacy)
2:165 0:004 1. Volume:
2:170 0:004 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)
2:191 0:021 Result of bootcode detection: bootable unknown (legacy)
2:195 0:004 2. Volume:
2:200 0:005 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
2:205 0:004 found optical drive
2:210 0:004 3. Volume:
2:215 0:004 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,4EC2165A-B06C-43D6-A8C5-AE1BABA0484E,0x28,0x64000)
2:225 0:010 Result of bootcode detection: bootable Clover (clover)
2:230 0:004 This is SelfVolume !!
2:235 0:004 4. Volume:
2:239 0:004 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,48D88F9A-6523-4B57-9609-DEDDF6F5D1FF,0x64028,0xDDFAC40)
2:245 0:005 5. Volume:
2:249 0:004 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,1C994288-2110-4E16-8B8C-6C1E1FF43245,0xDE5EC68,0x135F20)
2:255 0:005 6. Volume:
2:263 0:008 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(1,MBR,0xA313B030,0x800,0x74705800)
2:271 0:007 Result of bootcode detection: bootable Windows (vista,win)
2:278 0:007 PutNvramPlistToRtVars: nvram.plist not found
2:284 0:005 Using theme 'tonymacx86' (EFI\CLOVER\themes\tonymacx86)
2:289 0:004 Warning! Character width should be even!
2:293 0:004 Choosing theme tonymacx86
2:298 0:004 Custom legacy start
2:303 0:004 Custom legacy end
2:307 0:004 Scanning legacy ...
2:312 0:004 0: 'Whole Disc Boot' (legacy) not legacy
2:326 0:013 1: 'Whole Disc Boot' (legacy) not legacy
2:334 0:008 2: 'Whole Disc Boot' (legacy) not legacy
2:353 0:018 3: 'EFI' (clover) add legacy
2:372 0:018 added 'Boot Clover from EFI' OSType=3 Icon=clover
2:377 0:005 4: 'OSX El Capitan' (legacy) not legacy
2:387 0:009 5: 'Recovery HD' (legacy) not legacy
2:397 0:009 6: 'Legacy HD1' (vista,win) add legacy
2:410 0:013 added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win
2:420 0:009 Custom entries start
2:424 0:004 Custom entries finish
2:429 0:004 Scanning loaders...
2:434 0:004 0: 'Whole Disc Boot' no file system
2:443 0:009 1: 'Whole Disc Boot' no file system
2:452 0:009 2: 'Whole Disc Boot' no file system
2:462 0:010 3: 'EFI'
2:472 0:009 4: 'OSX El Capitan'
2:484 0:011 AddLoaderEntry for Volume Name=OSX El Capitan
2:490 0:006 Check if volume Is Hibernated:
2:495 0:004 Check sleep image 'by signature':
2:503 0:008 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
2:511 0:008 SleepImage name from pref: ImageVolume = 'OSX El Capitan', ImageName = '\private\var\vm\sleepimage'
2:519 0:007 sleepimage not found -> Not Found
2:524 0:004 hibernated: no - sign
2:533 0:009 5: 'Recovery HD'
2:543 0:010 AddLoaderEntry for Volume Name=Recovery HD
2:552 0:008 6: 'Legacy HD1' no file system
2:561 0:009 Custom tool start
2:566 0:004 Custom tool end
2:577 0:010 found tool \EFI\CLOVER\tools\Shell64U.efi
2:582 0:004 Checking EFI partition Volume 3 for Clover
2:586 0:004 Found Clover
2:594 0:008 GetEfiBootDeviceFromNvram: efi-boot-device-data not found
2:604 0:009 EfiBootVolume not found
2:609 0:004 found entry 2. 'Boot Mac OS X from OSX El Capitan', Volume 'OSX El Capitan', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,48D88F9A-6523-4B57-9609-DEDDF6F5D1FF,0x64028,0xDDFAC40)\System\Library\CoreServices\boot.efi'
2:618 0:008 DefaultIndex=2 and MainMenu.EntryCount=10
2:944 0:326 Found Mouse device:
2:951 0:006 GUI ready
7:057 4:106 StartLoader() start
7:070 0:013 Entry->Settings: <null string>
7:075 0:004 Finally: Bus=100000kHz CPU=3400MHz
7:080 0:004 Kernel and Kext Patches at C5A30AB8:
7:085 0:004 Allowed: y
7:089 0:004 Debug: n
7:094 0:004 KernelCpu: n
7:099 0:004 Lapic: n
7:103 0:004 Haswell-E: n
7:108 0:004 AICPUPM: y
7:112 0:004 AppleRTC: y
7:117 0:005 KernelPm: y
7:126 0:009 FakeCPUID: 0x0
7:131 0:004 ATIController: null
7:136 0:005 ATIDataLength: 0
7:141 0:005 0 Kexts to load
7:146 0:004 5 Kexts to patch
7:151 0:004 KextPatch[0]: 5 bytes, AppleHDAController
7:156 0:004 KextPatch[1]: 8 bytes, AppleAHCIPort
7:161 0:004 KextPatch[2]: 4 bytes, AppleHDA
7:166 0:004 KextPatch[3]: 5 bytes, AppleHDAController
7:171 0:004 KextPatch[4]: 4 bytes, AppleHDA
7:176 0:004 Loading boot.efi status=Success
7:354 0:178 GetOSVersion: : 10.11.5
7:368 0:013 insert table 9 for dev 0:0
7:373 0:005 Channels: 2
7:378 0:004 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
7:503 0:125 SMBIOS Type 17 Index = 0 => 0 0:
7:508 0:004 DIMM1 EMPTY
7:513 0:004 SMBIOS Type 17 Index = 1 => 2 2:
7:518 0:004 DIMM2 EMPTY
7:522 0:004 SMBIOS Type 17 Index = 2 => 1 1:
7:527 0:004 DIMM3 1333MHz 8192MB
7:532 0:004 mTotalSystemMemory = 8192
7:536 0:004 SMBIOS Type 17 Index = 3 => 3 3:
7:545 0:009 DIMM4 1333MHz 8192MB
7:559 0:013 mTotalSystemMemory = 16384
7:563 0:004 NumberOfMemoryDevices = 4
7:568 0:004 Type20[0]->End = 0x7FFFFF, Type17[2] = 0x2000
7:572 0:004 Type20[1]->End = 0xFFFFFF, Type17[3] = 0x6000
7:577 0:005 Table 131 is present, CPUType=35
7:583 0:005 Change to: 705
7:587 0:004 RSDT 0xD8F88028
7:592 0:004 FADT from RSDT: 0xD8F88118
7:597 0:004 XSDT 0xD8F88080
7:602 0:004 FADT from XSDT: 0xD8F971D0
7:607 0:004 Xsdt reallocation done
7:612 0:004 old FADT length=10C
7:622 0:010 Apply DsdtFixMask=0x80009051 new way
7:627 0:004 drop _DSM mask=0x0000
7:632 0:004 ========= Auto patch DSDT Starting ========
7:636 0:004 VideoCard devID=0x4128086
7:641 0:004 DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
7:646 0:004 USBADR[0] = 0x140000 and PCIe = 0xFFFE
7:651 0:004 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
7:655 0:004 Audio HDA (addr:0x1B0000) setting specified layout-id=3 (0x3)
7:660 0:004 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
7:669 0:009 first CPU found at 8779 offset 877D
7:675 0:005 score candidate at 8775
7:680 0:004 score inserted in acpi_cpu_score _PR_
7:685 0:004 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7
within the score: _PR_
7:730 0:044 Found PCIROOTUID = 0
7:734 0:004 Start PIC Fix
7:739 0:004 PIC size=A5 at 216A
7:743 0:004 found CRS at 217E size 8D
7:748 0:004 found PIC had IRQNoFlag will move -3 bytes
7:753 0:005 Fix Device PIC size -3
7:762 0:008 Start HPET Fix
7:767 0:004 patch HDEF in DSDT
7:772 0:005 Start HDA Fix
7:777 0:004 found HDA device NAME(_ADR,0x001B0000) And Name is HDEF
7:782 0:005 NewName HDEF already present, renaming impossibble
7:787 0:005 Start USB Fix
7:792 0:005 USB bridge[140000] at 6021, size = 1581
7:797 0:004 USB bridge[1A0000] at 5C3B, size = 3E4
7:802 0:004 found slave _DSM, skip
7:807 0:005 USB bridge[1D0000] at 56B1, size = 588
7:812 0:004 found slave _DSM, skip
7:821 0:008 ========= Auto patch DSDT Finished ========
7:826 0:004 Patch table: SSDT Cpu0Ist
7:831 0:004 SSDT len = 0x539
7:835 0:004 Patch table: SSDT CpuPm
7:840 0:004 SSDT len = 0xAD8
7:845 0:004 Patch table: SSDT SataTabl
7:850 0:004 SSDT len = 0x36D
7:854 0:004 Patch table: SSDT SaSsdt
7:859 0:004 SSDT len = 0x3528
7:864 0:004 Patch table: SSDT IsctTabl
7:869 0:005 SSDT len = 0xA26
7:874 0:005 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
7:879 0:005 Xsdt has tables count=12
7:888 0:008 corrected XSDT length=132
7:893 0:005 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
7:898 0:005 Intel Intel HD Graphics 4600 [8086:0412] :: PcieRoot(0x0)\Pci(0x2,0x0)
7:904 0:005 Intel GFX revision =0x6
7:909 0:004 HDA Controller [8086:0C0C] :: PcieRoot(0x0)\Pci(0x3,0x0) => setting specified layout-id=3 (0x3)
7:919 0:010 HDA Controller [8086:8C20] :: PcieRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=3 (0x3)
7:928 0:009 LAN Controller [1969:E091] :: PcieRoot(0x0)\Pci(0x1C,0x1)\Pci(0x0,0x0)
7:937 0:008 RCBA access disabled; trying to enable
7:942 0:005 stringlength = 1586
7:947 0:004 CurrentMode: Width=1920 Height=1080
7:952 0:004 Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: C580C118
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: C580C118
7:959 0:006 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
7:965 0:006 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
7:972 0:006 Extra kext: EFI\CLOVER\kexts\10.11\AppleALC.kext
7:984 0:012 Extra PlugIn kext: EFI\CLOVER\kexts\10.11\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
8:000 0:015 Extra kext: EFI\CLOVER\kexts\10.11\AppleIntelE1000e.kext
8:011 0:011 Extra kext: EFI\CLOVER\kexts\10.11\AtherosE2200Ethernet.kext
8:019 0:007 Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC.kext
8:028 0:008 Extra kext: EFI\CLOVER\kexts\10.11\NullCPUPowerManagement.kext
8:037 0:009 Extra kext: EFI\CLOVER\kexts\10.11\RealtekRTL8111.kext
8:050 0:013 Removed efi-boot-device-data variable: Not Found
8:056 0:005 Custom boot is disabled
8:065 0:008 Closing logAnd here's my config.plist
Code:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ACPI</key>
<dict>
<key>DSDT</key>
<dict>
<key>Debug</key>
<false/>
<key>DropOEM_DSM</key>
<false/>
<key>Fixes</key>
<dict>
<key>AddDTGP_0001</key>
<true/>
<key>FixHDA_8000</key>
<true/>
<key>FixHPET_0010</key>
<true/>
<key>FixIPIC_0040</key>
<true/>
<key>FixUSB_1000</key>
<true/>
<key>NewWay_80000000</key>
<true/>
</dict>
<key>Name</key>
<string>DSDT.aml</string>
<key>ReuseFFFF</key>
<false/>
</dict>
<key>SSDT</key>
<dict>
<key>DropOem</key>
<false/>
<key>Generate</key>
<false/>
</dict>
</dict>
<key>Boot</key>
<dict>
<key>Arguments</key>
<string>dart=0 darkwake=10 kext-dev-mode=1</string>
<key>Debug</key>
<true/>
<key>DefaultVolume</key>
<string>OSX El Capitan</string>
<key>Legacy</key>
<string>PBR</string>
<key>Secure</key>
<false/>
<key>Timeout</key>
<integer>3</integer>
<key>XMPDetection</key>
<false/>
</dict>
<key>CPU</key>
<dict>
<key>UseARTFrequency</key>
<false/>
</dict>
<key>Devices</key>
<dict>
<key>Audio</key>
<dict>
<key>Inject</key>
<string>3</string>
</dict>
<key>FakeID</key>
<dict>
<key>ATI</key>
<string>0x0</string>
<key>IMEI</key>
<string>0x0</string>
<key>IntelGFX</key>
<string>0x0</string>
<key>LAN</key>
<string>0x0</string>
<key>NVidia</key>
<string>0x0</string>
<key>SATA</key>
<string>0x0</string>
<key>WIFI</key>
<string>0x0</string>
<key>XHCI</key>
<string>0x0</string>
</dict>
<key>USB</key>
<dict>
<key>FixOwnership</key>
<false/>
<key>Inject</key>
<false/>
</dict>
</dict>
<key>DisableDrivers</key>
<array>
<string>Nothing</string>
</array>
<key>GUI</key>
<dict>
<key>Hide</key>
<array>
<string>Windows</string>
<string>\EFI\BOOT\BOOTX64.EFI</string>
</array>
<key>Language</key>
<string>en:0</string>
<key>Mouse</key>
<dict>
<key>DoubleClick</key>
<integer>500</integer>
<key>Enabled</key>
<true/>
<key>Mirror</key>
<false/>
<key>Speed</key>
<integer>8</integer>
</dict>
<key>Scan</key>
<dict>
<key>Entries</key>
<true/>
<key>Legacy</key>
<string>First</string>
<key>Linux</key>
<false/>
<key>Tool</key>
<true/>
</dict>
<key>ScreenResolution</key>
<string>1920x1080</string>
<key>Theme</key>
<string>tonymacx86</string>
</dict>
<key>Graphics</key>
<dict>
<key>Inject</key>
<dict>
<key>ATI</key>
<false/>
<key>Intel</key>
<true/>
<key>NVidia</key>
<false/>
</dict>
<key>NvidiaSingle</key>
<false/>
</dict>
<key>KernelAndKextPatches</key>
<dict>
<key>AppleRTC</key>
<true/>
<key>AsusAICPUPM</key>
<true/>
<key>Debug</key>
<false/>
<key>KernelCpu</key>
<false/>
<key>KernelHaswellE</key>
<false/>
<key>KernelLapic</key>
<false/>
<key>KernelPm</key>
<true/>
<key>KextsToPatch</key>
<array>
<dict>
<key>Comment</key>
<string>t1-HD4600_HDMI_Audio-1of2</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
PQsMAAA=
</data>
<key>Name</key>
<string>AppleHDAController</string>
<key>Replace</key>
<data>
PQwMAAA=
</data>
</dict>
<dict>
<key>Comment</key>
<string>External icons patch</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
RXh0ZXJuYWw=
</data>
<key>Name</key>
<string>AppleAHCIPort</string>
<key>Replace</key>
<data>
SW50ZXJuYWw=
</data>
</dict>
<dict>
<key>Comment</key>
<string>t1-10.11-AppleHDA/Realtek ALC...</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
gxnUEQ==
</data>
<key>Name</key>
<string>AppleHDA</string>
<key>Replace</key>
<data>
AAAAAA==
</data>
</dict>
<dict>
<key>Comment</key>
<string>t1-HD4600_HDMI_Audio-2of2</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
PQwKAAA=
</data>
<key>Name</key>
<string>AppleHDAController</string>
<key>Replace</key>
<data>
PQwMAAA=
</data>
</dict>
<dict>
<key>Comment</key>
<string>t1-10.9-10.11-AppleHDA/Realtek ALC1150</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
ixnUEQ==
</data>
<key>Name</key>
<string>AppleHDA</string>
<key>Replace</key>
<data>
AAnsEA==
</data>
</dict>
</array>
</dict>
<key>RtVariables</key>
<dict>
<key>BooterConfig</key>
<string>0x28</string>
<key>CsrActiveConfig</key>
<string>0x3</string>
</dict>
<key>SMBIOS</key>
<dict>
<key>BiosReleaseDate</key>
<string>02/29/08</string>
<key>BiosVendor</key>
<string>Apple Inc.</string>
<key>BiosVersion</key>
<string>MP31.88Z.006C.B05.0802291410</string>
<key>Board-ID</key>
<string>Mac-F42C88C8</string>
<key>BoardManufacturer</key>
<string>Apple Inc.</string>
<key>BoardType</key>
<integer>11</integer>
<key>ChassisAssetTag</key>
<string>Pro-Enclosure</string>
<key>ChassisManufacturer</key>
<string>Apple Inc.</string>
<key>ChassisType</key>
<string>06</string>
<key>Family</key>
<string>Mac Pro</string>
<key>Manufacturer</key>
<string>Apple Inc.</string>
<key>ProductName</key>
<string>MacPro3,1</string>
<key>SerialNumber</key>
<string>G8836HGK5J4</string>
<key>Trust</key>
<false/>
<key>Version</key>
<string>1.0</string>
</dict>
<key>SystemParameters</key>
<dict>
<key>InjectKexts</key>
<string>Yes</string>
<key>InjectSystemID</key>
<true/>
</dict>
</dict>
</plist>
