Contribute
Register

Clover post install error, getting "PTDI sensors: started"

Joined
Feb 26, 2012
Messages
864
Motherboard
Acer Aspire 5750G
CPU
Intel Core i7 2630QM @ 2GHz
Graphics
NVIDIA GeForce GT 540M + Intel HD Graphics 3000
Mac
Classic Mac
Mobile Phone
iOS
Managed to install 10.10 with no problems by injecting kexts at start up and using flag "kext-dev-mode=1".
I migrated from a time machine back up on 10.9 and then installed FakeSMC etc. I rebuilt caches and permissions also.
Now the boot processes is stopping and crashing with an error message on "PTID sensors: started" and I can't seem to find anything about it, not sure if maybe it is something to do with FakeSMC??
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
191,691
Motherboard
Intel DH67BL
CPU
Core i7-2600K
Graphics
Intel HD 3000
Mac
MacBook Air
Mobile Phone
iOS
Managed to install 10.10 with no problems by injecting kexts at start up and using flag "kext-dev-mode=1".
I migrated from a time machine back up on 10.9 and then installed FakeSMC etc. I rebuilt caches and permissions also.
Now the boot processes is stopping and crashing with an error message on "PTID sensors: started" and I can't seem to find anything about it, not sure if maybe it is something to do with FakeSMC??
"PTID sensors: started" is not an error.

Post a photo of your crash.
 
Joined
Feb 26, 2012
Messages
864
Motherboard
Acer Aspire 5750G
CPU
Intel Core i7 2630QM @ 2GHz
Graphics
NVIDIA GeForce GT 540M + Intel HD Graphics 3000
Mac
Classic Mac
Mobile Phone
iOS
"PTID sensors: started" is not an error.

Post a photo of your crash.
Ok I don't have a photo but I can describe in detail.

PTID is the last thing that is loaded in verbose and it stalls here, then it waits about 2 mins and the screen goes from verbose output to mixed code that is messed/mixed together, then an error shows up just like the photo I have attached but with the black screen underneath for the verbose output.
I've tried safe mode, single user, kext-dev-mode=1.
My normal boot flags are npci=0x2000 darkwake=0 slide=0.

http://jgronvall.files.wordpress.com/2011/01/photo_9.jpg?w=640&h=478
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
191,691
Motherboard
Intel DH67BL
CPU
Core i7-2600K
Graphics
Intel HD 3000
Mac
MacBook Air
Mobile Phone
iOS
Ok I don't have a photo but I can describe in detail.

PTID is the last thing that is loaded in verbose and it stalls here, then it waits about 2 mins and the screen goes from verbose output to mixed code that is messed/mixed together, then an error shows up just like the photo I have attached but with the black screen underneath for the verbose output.
I've tried safe mode, single user, kext-dev-mode=1.
My normal boot flags are npci=0x2000 darkwake=0 slide=0.

http://jgronvall.files.wordpress.com/2011/01/photo_9.jpg?w=640&h=478
Boot verbose and show photo. The last message is almost never the most important.
 
Joined
Feb 26, 2012
Messages
864
Motherboard
Acer Aspire 5750G
CPU
Intel Core i7 2630QM @ 2GHz
Graphics
NVIDIA GeForce GT 540M + Intel HD Graphics 3000
Mac
Classic Mac
Mobile Phone
iOS
Boot verbose and show photo. The last message is almost never the most important.
Ok I will do. I have just updated to the latest Clover, and I'm just reinstalling 10.10 again.
 
Joined
Feb 26, 2012
Messages
864
Motherboard
Acer Aspire 5750G
CPU
Intel Core i7 2630QM @ 2GHz
Graphics
NVIDIA GeForce GT 540M + Intel HD Graphics 3000
Mac
Classic Mac
Mobile Phone
iOS
Ok I will do. I have just updated to the latest Clover, and I'm just reinstalling 10.10 again.
Seems to be working ok for the moment, I installed FakeSMC with no plugins. But have to use 'kext-dev-mode=1' of course.
Will let you know if anything else changes.
 
Joined
Aug 28, 2015
Messages
42
Motherboard
Asus Zenbook UX305FA (Clover UEFI)
CPU
M-5Y10/BGA
Graphics
HD5300, 1920x1080
Mac
MacBook
Classic Mac
Mobile Phone
iOS
Boot verbose and show photo. The last message is almost never the most important.
Similar issue, but with 10.11.3. The USB's bootloader works, but the laptop's doesn't. PTIDSensors is the last line, but here's a picture:

IMG_3070.jpg
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
191,691
Motherboard
Intel DH67BL
CPU
Core i7-2600K
Graphics
Intel HD 3000
Mac
MacBook Air
Mobile Phone
iOS


Similar issue, but with 10.11.3. The USB's bootloader works, but the laptop's doesn't. PTIDSensors is the last line, but here's a picture:
Make sure your EFI/Clover on HDD is the same as on USB.
 
Joined
Aug 28, 2015
Messages
42
Motherboard
Asus Zenbook UX305FA (Clover UEFI)
CPU
M-5Y10/BGA
Graphics
HD5300, 1920x1080
Mac
MacBook
Classic Mac
Mobile Phone
iOS
Got it to work. Thank you
 
Top