Clover install stuck on the last step of the reboot in the NVMe drive

[luenne]

System Specs:

• Lenovo V130-14IKB 81HQ00MNGE (link leads to the hardware info of my laptop)
• SAMSUNG MZVLW256HEHP-000L2 NVMe drive
• Intel® Core™ i5-8250U
• 8 GB RAM , 256 GB SSD
• Intel UHD 620 Grafik
• 2 USB 3.0 ports

Guide used for the installation and some general information:

• https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
  • I used the following config.plist:
    • https://github.com/RehabMan/OS-X-Cl...ster/config_HD615_620_630_640_650_spoof.plist
• UEFI mode enabled in BIOS and all other BIOS settings also obeyed as instructed in the guide

Hey everyone,
First of all, thank you for reading this. This is my first Hackintosh install on a laptop so this may be just a simple error.
Please find attached my EFI folder. The problem is the following:
Booting from the installation usb worked out fine and I was able to format the disk using the osx installer and then boot into the NVMe. The installation took super long and throughout all of it weird graphical artifacts appeared, see picture 2.
Finally, throughout the following installation on the NVMe it got stuck on the last part of the installation, see last picture.
I would be super grateful for any hints. Maybe the config.plist is not specific enough?

 

[luenne]

So I booted clover with the following additional options:
-v -x -s -no-zp
And then I got this error message, for more see arched screenshot:

**Single-user boot**
Root device is mounted read-only
Enabling and disabling services is not supported in single-user mode.
and disabled services will not be respected when loading services
while in single-user mode.
To mount the root device as read-write:

$ /sbin/fsck -fy
$ /sbin/mount -uw

To boot the system:
$ exit

 

[luenne]

Anyone?

 

[Feartech]

Anyone?

SMCHelper-64 should not be used if you use VirutalSMC (you need to put virtualsmc.efi in there)

clover/kexts/other remove:
AirportBrcmFixup.kext
AppleALC.kext
BrcmFirmwareRepo.kext
BrcmPatchRAM2.kext
BT4LEContinuityFixup.kext
CodecCommander.kext
SMCBatteryManager.kext
SMCProcessor.kext
SMCSuperIO.kext
VoodooI2C.kext
VoodooI2CSynaptics.kext
(use a usb mouse until you have macOS installed)