Clover Boot from USB Freezes

Discussion in 'BIOS/UEFI' started by Josh1980, Dec 29, 2016.

  1. Josh1980

    Josh1980

    Joined:
    Dec 28, 2016
    Messages:
    5
    Dec 29, 2016 at 1:47 AM #1
    Josh1980

    Josh1980

    Joined:
    Dec 28, 2016
    Messages:
    5
    Hi, I used Unibeast successfully and created a bootable USB.

    Booted successfully from BIOS into Clover.

    Selected "Install from USB". Now it seems frozen at zero progress on the bar.

    Ideas?

    Thanks!
     
  2. Josh1980

    Josh1980

    Joined:
    Dec 28, 2016
    Messages:
    5
    Dec 29, 2016 at 2:50 AM #2
    Josh1980

    Josh1980

    Joined:
    Dec 28, 2016
    Messages:
    5
    If it helps, its a Z170N Gaming 5 motherboard, i7, 32gb, 1TB SSD. Brand new build.
     
  3. BreBo

    BreBo Moderator

    Joined:
    Oct 17, 2011
    Messages:
    4,656
    Mobo:
    Gigabyte GA-Z87X-OC
    CPU:
    Intel Core i7-4770K
    Graphics:
    Asus Strix GTX 970
    Dec 29, 2016 at 2:03 PM #3
    BreBo

    BreBo Moderator

    Joined:
    Oct 17, 2011
    Messages:
    4,656
    Mobo:
    Gigabyte GA-Z87X-OC
    CPU:
    Intel Core i7-4770K
    Graphics:
    Asus Strix GTX 970
    Please update your profile.
    Boot your system in Verbose Mode and post a picture of your screen when it freezes/hangs.

    How to Enter/Edit Boot Flags in Clover
     
  4. Josh1980

    Josh1980

    Joined:
    Dec 28, 2016
    Messages:
    5
    Dec 29, 2016 at 6:45 PM #4
    Josh1980

    Josh1980

    Joined:
    Dec 28, 2016
    Messages:
    5
    Here is where it freezes. IMG_0119.JPG
     
  5. Josh1980

    Josh1980

    Joined:
    Dec 28, 2016
    Messages:
    5
    Dec 29, 2016 at 11:46 PM #5
    Josh1980

    Josh1980

    Joined:
    Dec 28, 2016
    Messages:
    5
    I updated my BIOS to F20 (Gigabyte Z170N-Gaming5) and also tried to install El Capitan via Clover. This one also hung in the same spot, but the verbose mode log is different. Attached.
    IMG_0120.JPG
     
  6. kiiroaka

    kiiroaka

    Joined:
    Mar 11, 2016
    Messages:
    955
    Mobo:
    ASRock Z97 X4, 32GB DDR3 2400
    CPU:
    i5-4690k
    Graphics:
    nVidia GTX950 Strix
    Mac:
    Mac Pro
    Classic Mac:
    Classic, SE
    Dec 31, 2016 at 6:34 PM #6
    kiiroaka

    kiiroaka

    Joined:
    Mar 11, 2016
    Messages:
    955
    Mobo:
    ASRock Z97 X4, 32GB DDR3 2400
    CPU:
    i5-4690k
    Graphics:
    nVidia GTX950 Strix
    Mac:
    Mac Pro
    Classic Mac:
    Classic, SE
    Ideas? Sure - did you do all the BIOS setting prep? Turning off Serial port, turning off VT-d, tturning off Safe Boot, turning off CSM if you want to install in UEFI mode, enabling XHCI and EHCI, etc. after you updated the BIOS?

    Did you power off the system and try another USB port? What type of USB stick did you use to create UniBeast? (Your first dump seems to have gone past the Ethernet NIC and seems to be trying to read USB kexts. Maybe I'm wrong... )
     

Share This Page