Closed Thread: For FYI only > [GUIDE] 10.8 / How to enable HD4000

[joesoes]

10.8 / How to enable HD4000

Does anybody know how to solve the 'restart glitch'? It means I have to unplug and replug my DVI cable every time? Would an HDMI solve it?

EDIT: Scrap that, I found the solution (which also gives me a higher res apple boot screen, hurrah!)

Just add:

<key>Graphics Mode</key>
<string>1920x1080x64</string>

to 'org.chameleon.Boot.plist' found in Extra.

You are my hero! Now my system is perfect

 

[duydangle]

10.8 / How to enable HD4000

I get this model: device-id 0166 revision-id: 0009

But I tried EFI string 01660009 and GraphicsEnabler but It's not work.

UPDATE: I tried EFI string from ig-platform-id: 01660003, Stolen RAM for FB: 64MB, Pipes: 2, Ports: 2, FBMem: 2 and I got resolution changing but no CI QE. In system profiler it said: Intel Hd 4000 with 0MB RAM.

 

[corebuilder]

10.8 / How to enable HD4000

Sounds like HD4000 kext is not loaded. Does it say Intel HD Graphics 4000 on your About this mac? You can also check in system profiler > software > extensions. You should see AppleIntelHD4000Graphics, otherwise it is not loaded.

my hp probook 4540s

√ intel core i5 3210m 3rd generation 2.5 ghz >detected as 2.49 ghz
√ chipset mobile intel hm76 express
√ Intel hd 4000 graphics > [B] Shows 64 MB No kext loaded and if try GraphicsEnabler=Yes then got black face/screen No KP. Refresh rate issue? [/B]
X display type 15.6 in native mode: 1366 x 768(p) (59.989hz)
√ hard drive 640 gb hdd 4k type hat gpt issue but fixed finally thanks to macman
√ 8 gb ram ddr3 1333 mhz
x Atheros 9485gn 802.11b/g/n 1x1 wifi
x 3012 bluetooth 4.0 combo adapter > not working
√ hp idt high definition audio > voodo hda works but low volume.
? Jmicron pcie sd/mmc > not tested
x battery manager > apci unknown type and sucks on detecting betray :-(
√ hp hd webcam > working but photo booth not detecting camera
√ dvd writer hp > wob
√ keyboard touchpad > voodo ps2 with 2 finger scroll and swipe i guess {i am a mouse user}

Missed something? How to fix that?

 

[cjlucas]

10.8 / How to enable HD4000

What's the expected behavior for platform-ids that don't work? Does the system boot successfully w/o support or does it kernel panic? Because for every id I've tried (including the one suggested in the OP for my motherboard), I've gotten kernel panics. I'm running a setup similar to Einsteiniac (GA Z77X-UP5 TH + ThunderBolt Display).

 

[tovkal]

10.8 / How to enable HD4000

-Deleted-

 

[son01490517]

10.8 / How to enable HD4000

Had installed on a Dell Audi i5 3210m - HD4000 + GT630m today with ML 10.8
When i tried to booted into 10.8, i did following steps :
+ Try ig-platform-id: 01660003 like post 1 : Boot hanged at white text
+ Delete HD4000 kext and Framebuffer : like above
+ Delete Nvdia kext (50hal,gf100,gk100,resman) : booted but no QE CI of course

-> So i reinstalled and do step 1 and step 3 only and viola, QE CI had come
-> The most important step here was delete Nvidia kext. Not sure what happend but i will find some laptop with Optimus or Hybrid Graphics and research more.

 

[joesoes]

10.8 / How to enable HD4000

Still got some issues with the game Starcraft 2 (Se attached). What to do?

 

[Rupert91]

10.8 / How to enable HD4000

Still got some issues with the game Starcraft 2 (Se attached). What to do?

Press command+m at the log in screen. It will set you to windowed mode. From there, change the resolution to match your monitor specs.

 

[Cinner]

10.8 / How to enable HD4000

Has anybody got their HD 4000 working without setting it as primary graphics in bios? (Assuming you also use another GFX card.)

I want to use my Nvidia GTX 570 as the primary graphics (because of my multiple monitor / TV setup), but when I set the GTX 570 as primary, I immediately lose signals from both cards as soon as Mountain Lion is loaded. I am using graphicsenabler = yes (for the 570) and an EFI string for the 4000, along with the latest Chimera.

 

[Alfa147x]

10.8 / How to enable HD4000

Has anybody got their HD 4000 working without setting it as primary graphics in bios? (Assuming you also use another GFX card.)

I want to use my Nvidia GTX 570 as the primary graphics (because of my multiple monitor / TV setup), but when I set the GTX 570 as primary, I immediately lose signals from both cards as soon as Mountain Lion is loaded. I am using graphicsenabler = yes (for the 570) and an EFI string for the 4000, along with the latest Chimera.

Try without the EFI string. You don't need it if you have genabler=yes