- Joined
- Jan 6, 2013
- Messages
- 110
- Motherboard
- MAC
- CPU
- i7-3770K @ 3.6 Ghz
- Graphics
- HD4000
- Mac
- Classic Mac
- Mobile Phone
I have two Sharp Aquos televisions, both perfectly capable of displaying 1080p, however, use 1080p display refuses to work with them at all. The screen is just garbled. It only works at 1366x768, with a DVI-->HDMI Adapter.
The first boot after Chimera install, the screen defaults to 1366x768, and if you ever change it again, you have to reinstall the OS or you'll never get that resolution to work again on HDMI.
Not even rebooting, pulling the HDMI Cable and replugging it, or reinstalling the bootloader works. Forcing any other resolution doesn't work either with the plist, garbled video.
Changing to any other resolution does not work either. 1080i displays completely stretched from top to bottom. Any other resolution, screen garbles.
EDIT- Figured out at least something. It won't work until the OVERSCAN slider is slid all the way to the right. Default, it garbles the screen. Now 1080p works on my televisions.
The first boot after Chimera install, the screen defaults to 1366x768, and if you ever change it again, you have to reinstall the OS or you'll never get that resolution to work again on HDMI.
Not even rebooting, pulling the HDMI Cable and replugging it, or reinstalling the bootloader works. Forcing any other resolution doesn't work either with the plist, garbled video.
Changing to any other resolution does not work either. 1080i displays completely stretched from top to bottom. Any other resolution, screen garbles.
EDIT- Figured out at least something. It won't work until the OVERSCAN slider is slid all the way to the right. Default, it garbles the screen. Now 1080p works on my televisions.