Contribute
Register

CLEVO N870HZ HIGH SIERRA HELP

Status
Not open for further replies.
Mine is ALC269 vc2
I followed the instructions patching with mirone HDApatcher a vanilla appleHDA.kext
But I don't see any audio devices in my system
What if I patch my original 10.13.3 appleHDA.kext?
 
what does it mean?
Screen Shot 2018-02-24 at 18.30.50.png
 
What if I patch my original 10.13.3 appleHDA.kext?

I don't understand your question.
Pre-requisite for running the HDA patcher: vanilla (original) AppleHDA.kext in /S/L/E.
 
sorry, now understand. I patched a AppleHDA.kext (10.13.1) But now I have a AppleHDA.kext (10.13.3).
I must repatch everything...
 
sorry, now understand. I patched a AppleHDA.kext (10.13.1) But now I have a AppleHDA.kext (10.13.3).
I must repatch everything...

Note also that KextsToPatch entries for AppleHDA are only applicable when using an AppleHDA injector (such as aDummyHDA.kext), not fully patched AppleHDA.kext.
 
tried also aDummyHDA.kext with no result.
I will try to repatch everything...
 
tried also aDummyHDA.kext with no result.

I guessed that... as you still have the KextsToPatch entries in your config.plist for it.
Which... should not be there when using fully patched AppleHDA!

And... keep in mind using aDummyHDA.kext requires special cache rebuild procedures. See FAQ for details.
 
I repatched starting from appleHDA.kext 13.3 with Mirone HDA patcher
AppleHDA Patcher
8086:a170 to 8086:a171
Laptop. Realtek ALC 269 vc2
DSDT irq
Install patched AppleHDA.kext

with no result.

I'm a little discouraged.

is it useful?

Screen Shot 2018-02-26 at 17.04.01.png


dfrank970

here my problem report file
 

Attachments

  • debug_23180.zip
    1.8 MB · Views: 81
I repatched starting from appleHDA.kext 13.3 with Mirone HDA patcher
AppleHDA Patcher
8086:a170 to 8086:a171
Laptop. Realtek ALC 269 vc2
DSDT irq
Install patched AppleHDA.kext

with no result.

I'm a little discouraged.

is it useful?

View attachment 316016

dfrank970

here my problem report file
have you tried to change layout-id from 1 to 3 in config.plist?
 
I can't find layout-id in my config.plist...
 
Status
Not open for further replies.
Back
Top