Contribute
Register
Status
Not open for further replies.
Joined
Nov 16, 2016
Messages
3
Motherboard
Intel Z170
CPU
intel I7 6700k
Graphics
NVIDIA gtx 1080 8GB
Mac
  1. Mac Pro
Mobile Phone
  1. iOS
I am working on getting my first hackintosh up and running, and I've been running into problems.

first of all, this is a laptop, specs below.

Motherboard: Intel Z170
Processor: Intel Core i7 6700K 4.0GHz
Memory: 16GB DDR4 2133MHz
Storage Drive 1: M.2 SSD - 256GB Samsung 950 PRO (NVM Express)
Storage Drive 2: Hard Disk - 1TB 7200RPM (SATA 3Gb/s)
Wireless Card: Killer Dual Band Wireless-AC 1535 + Bluetooth (M.2 Socket)
Graphics Card(s): GeForce GTX 1080 8GB (Desktop Class) (VR Ready) (NVIDIA G-Sync)

My plan is to install using the integrated graphics on the CPU, as the 1080 doesn't have driver support yet, and using the basic Sierra install guide with Unibeast, I'm able to get to the installer, but I'm installing to the m.2 SSD and (from my limited understanding that is steadily growing) Unibeast doesn't have the driver built into it to recognize the m.2's. I've tried using a lot of different Clover builds and I've yet to figure out really how to use it, and I can't even get to the installation guide yet.

My question is, is there any way I can add Rehabman's patch for the m.2 SSD's to Unibeast's booter? And if not, is there a guide someone can reference to give me basic understanding to adding that into it? even Stork's method:

(https://www.tonymacx86.com/threads/...-gigabyte-gtx-950.181272/page-53#post-1283085)

leaves me confused and crying in the corner.

Any help getting this up and running is appreciated!
 

RehabMan

Moderator
Joined
May 2, 2012
Messages
184,101
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
I am working on getting my first hackintosh up and running, and I've been running into problems.

first of all, this is a laptop, specs below.

Motherboard: Intel Z170
Processor: Intel Core i7 6700K 4.0GHz
Memory: 16GB DDR4 2133MHz
Storage Drive 1: M.2 SSD - 256GB Samsung 950 PRO (NVM Express)
Storage Drive 2: Hard Disk - 1TB 7200RPM (SATA 3Gb/s)
Wireless Card: Killer Dual Band Wireless-AC 1535 + Bluetooth (M.2 Socket)
Graphics Card(s): GeForce GTX 1080 8GB (Desktop Class) (VR Ready) (NVIDIA G-Sync)

My plan is to install using the integrated graphics on the CPU, as the 1080 doesn't have driver support yet, and using the basic Sierra install guide with Unibeast, I'm able to get to the installer, but I'm installing to the m.2 SSD and (from my limited understanding that is steadily growing) Unibeast doesn't have the driver built into it to recognize the m.2's. I've tried using a lot of different Clover builds and I've yet to figure out really how to use it, and I can't even get to the installation guide yet.

My question is, is there any way I can add Rehabman's patch for the m.2 SSD's to Unibeast's booter? And if not, is there a guide someone can reference to give me basic understanding to adding that into it? even Stork's method:

(https://www.tonymacx86.com/threads/...-gigabyte-gtx-950.181272/page-53#post-1283085)

leaves me confused and crying in the corner.

Any help getting this up and running is appreciated!

NVMe info in the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
 

RehabMan

Moderator
Joined
May 2, 2012
Messages
184,101
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
Thanks for the quick reply! I actually already have this info from searching the forums and i have the zip downloaded. I guess a better question is can I patch this into Unibeast's plist or only clover's?

Question is nonsense.
Current Unibeast uses Clover.
 
Status
Not open for further replies.
Top