Contribute
Register

Chimera 3.0 Update

Status
Not open for further replies.
Made my day thank you!
Too many glitch problems just resolved on my Z87N-WIFI based system....

Repair Permissions using the Disk Utility on the drive to be updated;*
Backup your current installation using Carbon Copy Cloner or SuperDuper;
Download the latest MultiBeast 6.2.2 for Mavericks which has the latest ACL8xy audio drivers;
Use the Software Update to download and install 10.9.3 (recommend using the Combo Update);
Re-boot;
Run MultiBeast for Mavericks 6.2.2 and just select your audio driver to install and TRIM (if needed);
Run Install Chimera 3.0.1.pkg
Repair Permissions again.*
Re-boot; and
Repair Permissions again.*
 
Article: Chimera 3.0 Update

guys question is there anyway i can use my mac book to repartation my hard drives to redo my install
 
Article: Chimera 3.0 Update

I updated to Chimera 3.0 and it looks fine except the boot options screen has changed quite a bit. My plist file (shown below) previously showed three icons each labelled as per the plist. Now the Windows icon shows a circle with a box and question marks underneath it.

Any suggestion show I can fix this?

Thanks

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string></string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Rename Partition</key>
<string>"System Reserved" "Win7x64"</string>
<key>Default Partition</key>
<string>System Reserved</string>
<key>Hide Partition</key>
<string>"M-1TB" "M-1TB_Blk" </string>
<key>Timeout</key>
<string>5</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>
</plist>
 
Thank you very much, Macman and Tonymac!!!
 
Article: Chimera 3.0 Update

… so, I'm answering to myself ;):
Chimera 3.0.1 broke sleep on my 10.8.5 partition, that's enough for reverting to 2.2.1. :wave: :cool:

... and now I must correct myself: after rebooting my 10.8.5 partition with UseKernelCache=No all is fine!
Sleep/Wake and sound are working nicely on every partition of my 10.9/10.8/10.6 triple-boot. :headbang:
 
Article: Chimera 3.0 Update

My boot is on UEFI..I tried to install but I'm still on 2.2 at boot ..how do I proceed ? thx
Use Clover. Configure it once, put all the necessary kexts on the EFI volume as well and enjoy. I remember reinstalling kexts after system updates, but since I upgraded to 10.9 and migrated to clover I've got FakeSMC and whatever I need on the EFI volume together with the boot loader - sometimes I even forget this is a hackintosh, not a real thing.
 
please i need a help with my Asus z87 plus mother board can boot without usb stick i tried all the boot loaders but didn't work.
 
Just installed, now I can't boot. It comes to the boot loader, and as soon as I select OSX 10.9.3, it boots back to the BIOS screen. I installed from the new Multibeast 6.3. I tried using -x -v -f flags, commenting out GraphicsEnabler, nothing seems to work.

I have a GA-Z68XP-UD3 Motherboard, UEFI BIOS
Nvidia GTX-570 graphics
 
Article: Chimera 3.0 Update

Just installed, now I can't boot. It comes to the boot loader, and as soon as I select OSX 10.9.3, it boots back to the BIOS screen. I installed from the new Multibeast 6.3. I tried using -x -v -f flags, commenting out GraphicsEnabler, nothing seems to work.

I have a GA-Z68XP-UD3 Motherboard, UEFI BIOS
Nvidia GTX-570 graphics

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Boot Banner</key>
<string>No</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>1900x1200x32</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>HDAEnabler</key>
<string>Yes</string>
<key>HDEFLayoutID</key>
<string>01000000</string>
<key>Hide Partition</key>
<string>hd(1,2) hd(2,2)</string>
<key>Instant Menu</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>nvda_drv=1</string>
<key>Rename Partition</key>
<string>hd(0,2) "OSX 10.9.3 Mavericks"; "System Reserved" "Windows 7"</string>
<key>Theme</key>
<string>CleanMac</string>
<key>UseKernelCache</key>
<string>No</string>
</dict>
</plist>
 
Article: Chimera 3.0 Update

I installed new Chimera from Multibeast and i see this stuff for bdmesg (look picture), but actually when booting it writes "chameleon 2.2"
 

Attachments

  • Screen Shot 2014-05-30 at 3.34.26 PM.png
    Screen Shot 2014-05-30 at 3.34.26 PM.png
    110.9 KB · Views: 253
  • IMG_0415.jpg
    IMG_0415.jpg
    757.6 KB · Views: 241
Status
Not open for further replies.
Back
Top