Contribute
Register

Chimera 2.2 Update

Status
Not open for further replies.
Article: Chimera 2.2 Update

Chimera 2.2.1 Update

Now Available in MultiBeast 5.5.2, UniBeast 2.1.1 and as a standalone installer.

The only change is the default IGPlaformID for the HD 4600 changed from 04160000 to 0D220003 to allow for better compatibility.
 
Please check my input is right or wrong, thank you! My gpu is hd4600 in i5 4430s

igpenabler=yes igplatformid=0c260000 -v -f


i need test the platforid one by one.
 
Article: Chimera 2.2 Update

I had my GA H77 DS3H working perfectly in 10.8.4 with GT640 .... GraphicsEnabler=No ....
I now want to use only onboard Graphics of my 3570 processor ... ie... the HD2500 ...with Chimera 2.2 ...
I ran the Chimera 2.2 setup and restarted with GraphicsEnabler=Yes and tried again with with IGPEnabler=Yes ...
But the Full HD HDMI display is corrupt/garbled on boot .... but boots perfectly in Safe mode ; showing HD2500 and 768MB memory ....
HELP ..................

Have the same problem on GA B75M D3H rev 1.1 with i3-3240 (HD2500 onboard). Has anyone found a solution? Thanks.
 
Hello.

After having just updated to Mavericks (OSX 10.9), I am having trouble getting my discrete graphics card to work.
I am running a GA-Z68xp-ud3 / i5-2500k / Gigabyte Radeon HD 6850.

My system always seems to default to the onboard HD3000 port regardless of what settings I use.
Do I need to use the igplatformid command? It would seem that one is only for the onboard graphics and those work fine...please help.

I really only want to use the discrete graphics card and have tried various combinations of IGPEnabler=Yes/No and GraphicsEnabler=Yes/No.
Also, in my BIOS, I have tried different settings for the InitDisplay=PCI/PCIe etc and disabling the onboard HD3000.
I have seen the suggestion to use IGPEnabler=Yes, GraphicsEnabler=No, but I need to run a different profile (ATIConfig=Bulrushes) to make my video card work.

What should my boot.plist say to make just the discrete HD 6850 work over HDMI?
Thanks.
 
Article: Chimera 2.2 Update

MacMan:
Please help with my previous post about how can i get i53570 intel hd 2500 and nvidia gt640 working together with chimera 2.2 and how can i do it by just updating chimera
reards wolfintosh

I had this same problem and what worked for me was to re-run multibeast and be sure to check the box for "Intel Graphics Patch for mixed configurations". Good luck!
 
I can not run the hd4400
how can I do?

on my Lenovo s510p i7 4500 Haswell
 
Article: Chimera 2.2 Update

I can not run the hd4400
how can I do?

on my Lenovo s510p i7 4500 Haswell
There is limited support for the HD4400 in Mavericks when using Chimera 3.0.1
 
Status
Not open for further replies.
Back
Top