Contribute
Register

<< Solved >> Catalina > Stuck on APFS module stuck 1683 with SSDT-EC.aml file(No matter what i do)

Status
Not open for further replies.
Joined
Apr 11, 2019
Messages
12
Motherboard
ASUS Prime H370M-Plus
CPU
i5-8400
Graphics
Intel UHD 630
Mobile Phone
  1. Android
  2. iOS
after updating my bios to the latest version ma trying to freshly install MacOS Catalina but am getting this error "Stuck on APFS module stuck 1683" every time i try to boot up the installer..

before the bios update i could boot up normally but i had problems with my UHD630 that has no acceleration only 7mb so i though maybe i should upgrade my Bios but unfortunately it's not working anymore.

i already tried to search for error 1683 and tried different article and solutions and copied SSDT-EC.aml to c/k/o but still the same result.
I used in this process the latest version from UniBeast 10.1.0

and here is my parts list:
CPU: Intel Core I5 8400
MB: ASUS PRIME H370M-Plus
GPU: UHD630
Ram: Corsair Vengeance 16GB DDR4-2400
SSD: SanDisk SSD Plus Sata III 480GB (for the System)
HDD:
Wersterndigital 640GB (media 1)
Samsung 1tb (media 2)
Wifi Card: Fenvi BCM94360CS2

1683.jpg
 

Attachments

  • EFI.rar
    3 MB · Views: 64
you EFI Folder is messed up. I will send you my fix of it, it may or may not work but give it a try
 

Attachments

  • EFI.zip
    3.4 MB · Views: 60
Make sure you have very latest Clover version 5107 and try this Clover folder. Use a DP port if you can and these BIOS settings;
  • Load Optimized Defaults
  • Disable VT-d
  • Disable Secure Boot Mode
  • Set OS TypeOther
  • Turn off internal Serial port
  • Turn off Network stack for boot
  • Set XHCI Handoff to Enabled
  • Enable HD Audo
  • Set dGPU as priority for boot
  • Set internal GPU to enable
  • Set DMVT pre-alloc to 64MB
  • Set USB legacy to enabled
  • Activate XMP profile 1 f your Ram has it
  • Set ERP to enable
 

Attachments

  • CLOVER.zip
    2.9 MB · Views: 65
Make sure you have very latest Clover version 5107 and try this Clover folder. Use a DP port if you can and these BIOS settings;
  • Load Optimized Defaults
  • Disable VT-d
  • Disable Secure Boot Mode
  • Set OS TypeOther
  • Turn off internal Serial port
  • Turn off Network stack for boot
  • Set XHCI Handoff to Enabled
  • Enable HD Audo
  • Set dGPU as priority for boot
  • Set internal GPU to enable
  • Set DMVT pre-alloc to 64MB
  • Set USB legacy to enabled
  • Activate XMP profile 1 f your Ram has it
  • Set ERP to enable
I'm already using the latest clover version 5107 but unfortunately changed nth :(
i doupled checked the bios setting everything is okay
 
thanks a lot guys for helping ... i did it finally after fixing all the problems got my Vanilla Build :D
Please post your solution and mark the post as solved please. This is to help others with similar problems. Cheers!
 
Status
Not open for further replies.
Back
Top