- Joined
- Sep 18, 2019
- Messages
- 2
- Motherboard
- C55 Toshiba
- CPU
- Intel
- Graphics
- Intel hd 4000
Graphics card: HD4000
processor/motherboard intel i5 (3220m)
Clover w/ kexts to allow booting Catalina (fully upgraded)
next steps for the moderate advanced users only bcuz I'm not feeling like a all out tutorial on this
grab the Catalina.app and create the usb installer
after its done replace clover with this clover.zip contents and change the config.plist as follows (against I was lazy hence moderate advanced users will be able to follow this) once clover boots up from usb:
NOTE: [grabbed the base dsdt from another model with similar specs)
ACPI/DSDT/Fixes
1. Only Fix Regions is needed
2. everything else unchecked
PCI Drivers
1. USB INJECTION needs checked
2. everything else unchecked
CPU TUNING:
1. Check Generate P and C states
2. Check enable C4 and C6
3. Check patchapic
4. everything else unchecked
Integrity Protection:
1. check Allow untrusted kexts
2. check allow unrestricted fs
3. check all task for pid
4. everything else unchecked
Sys Params Boot Args Menu
1. Everything unchecked
Catalina should boot (I tried many ways for a few hours this worked)
UPDATE: clover fresh off the USB that was used to load Catalina
the above clover click-configs still apply (my profile lists one of the other systems I used for a Mojave)
here's the laptop i5 sys report for my catalina
Hardware Overview:
Model Name: iMac
Model Identifier: iMac14,2
Processor Name: Dual-Core Intel Core i5
Processor Speed: 2.59 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Hyper-Threading Technology: Enabled
Memory: 8 GB
Boot ROM Version: 143.0.0.0.0
Apple ROM Info: Apple ROM Version.
Board-ID : Mac-27ADBB7B4CEE8E61
⌘ Powered by Clover revision: 5119 (HEAD, commit 0f5da727e)
SMC Version (system): 2.15f7
Serial Number (system): D25LHACKF8JC
Hardware UUID: C43613BC-1417-51AE-ABF4-D3C44F7A3AD7
and all my bios virtualize VT is enabled (secure rom obviously needs disabled tho)
Update: WiFi working
1) Grabbing the itlm kext (link above) and placing it in clover EFI kexts/other folder and,
2) You will then need to run heliport (link below) to connect to a WiFi once booted into OS X
processor/motherboard intel i5 (3220m)
Clover w/ kexts to allow booting Catalina (fully upgraded)
next steps for the moderate advanced users only bcuz I'm not feeling like a all out tutorial on this
grab the Catalina.app and create the usb installer
after its done replace clover with this clover.zip contents and change the config.plist as follows (against I was lazy hence moderate advanced users will be able to follow this) once clover boots up from usb:
NOTE: [grabbed the base dsdt from another model with similar specs)
ACPI/DSDT/Fixes
1. Only Fix Regions is needed
2. everything else unchecked
PCI Drivers
1. USB INJECTION needs checked
2. everything else unchecked
CPU TUNING:
1. Check Generate P and C states
2. Check enable C4 and C6
3. Check patchapic
4. everything else unchecked
Integrity Protection:
1. check Allow untrusted kexts
2. check allow unrestricted fs
3. check all task for pid
4. everything else unchecked
Sys Params Boot Args Menu
1. Everything unchecked
Catalina should boot (I tried many ways for a few hours this worked)
UPDATE: clover fresh off the USB that was used to load Catalina
the above clover click-configs still apply (my profile lists one of the other systems I used for a Mojave)
here's the laptop i5 sys report for my catalina
Hardware Overview:
Model Name: iMac
Model Identifier: iMac14,2
Processor Name: Dual-Core Intel Core i5
Processor Speed: 2.59 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Hyper-Threading Technology: Enabled
Memory: 8 GB
Boot ROM Version: 143.0.0.0.0
Apple ROM Info: Apple ROM Version.
Board-ID : Mac-27ADBB7B4CEE8E61
⌘ Powered by Clover revision: 5119 (HEAD, commit 0f5da727e)
SMC Version (system): 2.15f7
Serial Number (system): D25LHACKF8JC
Hardware UUID: C43613BC-1417-51AE-ABF4-D3C44F7A3AD7
and all my bios virtualize VT is enabled (secure rom obviously needs disabled tho)
Update: WiFi working
GitHub - yaza-putu/lenovo-thinkpad-l430: EFI file for laptop lenovo thinkpad L430 core i3 3120M, bootloader opencore 0.6.3, MacOs Catalina 10.15.7
EFI file for laptop lenovo thinkpad L430 core i3 3120M, bootloader opencore 0.6.3, MacOs Catalina 10.15.7 - yaza-putu/lenovo-thinkpad-l430
github.com
1) Grabbing the itlm kext (link above) and placing it in clover EFI kexts/other folder and,
2) You will then need to run heliport (link below) to connect to a WiFi once booted into OS X
Releases · OpenIntelWireless/HeliPort
Intel Wi-Fi Client for itlwm. Contribute to OpenIntelWireless/HeliPort development by creating an account on GitHub.
github.com
Attachments
Last edited: