- Joined
- Jun 3, 2013
- Messages
- 21
- Motherboard
- ASUS PRIME Z390-P
- CPU
- i5-8600K
- Graphics
- GTX 1070 Colorful
- Mac
Dear, all
Motherboard : GIGABYTE Z370 HD3
CPU : Intel Core i58600K
GPU : NVidia GTX 1070 Colofrul
RAM: DDR4 2666Mhz 32GB
SSD SanDsik1000 - 1TB
i'm getting the common error apfs_module_start but the solution which is posted with SSDT-USBX.aml doesn't seem to help
i might be doing something worng
I've followed the below guide, tried both files in the /EFI/CLOVER/ACPI/Patched
to no avail same problem still persists. I've tried i have 3 different thumb or flash drives with 2 of them catalina built with unibeast and another one with lilu also i have Mohave built with unibeast neither are working...
also to note the flash disks worked perfectly on my previous Motherboard, ASUS Prime2 Z370 which i dont have anymore
PLEASE Help i've been on this for 2 weeks already couldn't move a single bit... tried everything...
Motherboard : GIGABYTE Z370 HD3
CPU : Intel Core i58600K
GPU : NVidia GTX 1070 Colofrul
RAM: DDR4 2666Mhz 32GB
SSD SanDsik1000 - 1TB
i'm getting the common error apfs_module_start but the solution which is posted with SSDT-USBX.aml doesn't seem to help
i might be doing something worng
I've followed the below guide, tried both files in the /EFI/CLOVER/ACPI/Patched
to no avail same problem still persists. I've tried i have 3 different thumb or flash drives with 2 of them catalina built with unibeast and another one with lilu also i have Mohave built with unibeast neither are working...
[Guide] USB power property injection for Sierra (and later)
Hi RehabMan, I can't figure out why sometimes my mouse isn't working after sleep.Other devices work perfectly. I properly injected USB-UIAC/USBX SSDT as you can see in my IOReg. I have another question: how I can see the log output of verbose mode? - can't find any boot.log or kernel.log in...
www.tonymacx86.com
also to note the flash disks worked perfectly on my previous Motherboard, ASUS Prime2 Z370 which i dont have anymore
PLEASE Help i've been on this for 2 weeks already couldn't move a single bit... tried everything...