Contribute
Register

<< Solved >> Catalina install crashes on Gigabyte B360N WIFI & Intel Core i5-9400

Joined
Dec 21, 2013
Messages
9
Motherboard
<< need model # >> See Forum Rules !!
CPU
i5 << need model # >> See Forum Rules !!
Graphics
GT 650M
Mac
  1. iMac
Mobile Phone
  1. iOS
Hi,
I've been having troubles getting to installation of my friend's new hackintosh and cannot make it work no matter how many iterations I have tried.

HW is following:
Motherboard: Gigabyte B360N WIFI
CPU: CPU Intel Core i5-9400 (2,9 GHz, 9MB, LGA 1151) , Coffee Lake Refresh
Memory: Kingston 2x8GB DDR4 2666MHz CL13 (HX426C13PB3K2/16) HyperX Predator
SSD Samsung 970 EVO, 500GB, M.2 - 2280
HDMI-connected LCD display

I belive I gathered all necessary kexts for the hardware, tried multiple Multibeast and Clover installations and could not make it work in any of them. I attach I believe my best version that I expected to work.

The issue in this version is: after couple of minutes of loading the installation, the monitor shuts off with "no signal" notice and I am not able to make anything out of verbose mode as it is too sudden.

I'd more than welcome any idea you might have.

Thank you!
 

Attachments

  • EFI.zip
    6 MB · Views: 30
Joined
Nov 15, 2012
Messages
19
Motherboard
MSI P55-GD65
CPU
i7 860
Graphics
GTX 650 Ti
Mobile Phone
  1. Android
Hi,
I've been having troubles getting to installation of my friend's new hackintosh and cannot make it work no matter how many iterations I have tried.

HW is following:
Motherboard: Gigabyte B360N WIFI
CPU: CPU Intel Core i5-9400 (2,9 GHz, 9MB, LGA 1151) , Coffee Lake Refresh
Memory: Kingston 2x8GB DDR4 2666MHz CL13 (HX426C13PB3K2/16) HyperX Predator
SSD Samsung 970 EVO, 500GB, M.2 - 2280
HDMI-connected LCD display

I belive I gathered all necessary kexts for the hardware, tried multiple Multibeast and Clover installations and could not make it work in any of them. I attach I believe my best version that I expected to work.

The issue in this version is: after couple of minutes of loading the installation, the monitor shuts off with "no signal" notice and I am not able to make anything out of verbose mode as it is too sudden.

I'd more than welcome any idea you might have.

Thank you

lvalenta did you manage to work this out ? It says "Solved" .​

If so any chance of your EFI , I have Exactly the same hardware.
Thanks.
 
Joined
Dec 21, 2013
Messages
9
Motherboard
<< need model # >> See Forum Rules !!
CPU
i5 << need model # >> See Forum Rules !!
Graphics
GT 650M
Mac
  1. iMac
Mobile Phone
  1. iOS

lvalenta did you manage to work this out ? It says "Solved" .​

If so any chance of your EFI , I have Exactly the same hardware.
Thanks.
Hi.
I'm sorry I didn't get any notification. My working Clover EFI is here:
 

Attachments

  • EFI 4.zip
    8 MB · Views: 25
Top