- Joined
- Sep 11, 2018
- Messages
- 2
- Motherboard
- Asus Prime B360
- CPU
- i5-9600K
- Graphics
- RX 570 & UHD 630
- Mac
- Mobile Phone
Hi guys,
i'm fighting with a SFF Fujitsu G558. A H310 chipset, i5-9600k cpu with UHD630 (deviceid 0x3E98) or i3-9100 with UHD630 (deviceid 0x3E91), 32GB DDR4, Realtek 8111 and Realtek Audio, M2 PCIe SSD Intel or Sata SSD. I tried both CPUs and also have another hackintosh(Asus B360 mainboard) working correctly with this 2 cpus. So no problems with UHD630 from this CoffeeLake-R. Whatever i do i get a kernel panic. Only booting with fake 0x12345678 i can boot in Catalina 10.15.2. Or with clover -igfxvesa parameter. I have tried every clover settings and DSDT patching. Also @Sihastru efi patching for 64MB and MAX setup with setup_var witch might be not required as in BIOS i can modify those settings. No CFG Lock in BIOS but with setup_var it was successful. Also Intel framebuffer patching from @headkaze and also Clover kext-patching posted above by @Sihastru
BTW - Fujistu G558 DVMT Prealoc address is 0x8E3 (64MB =0x02), DVMT Total Memory is 0x8E4 (MAX = 0x03) and CFG Lock is at 0x5C4 (Disabled = 0x00)
Any help is appreciated.
Thank you!
i'm fighting with a SFF Fujitsu G558. A H310 chipset, i5-9600k cpu with UHD630 (deviceid 0x3E98) or i3-9100 with UHD630 (deviceid 0x3E91), 32GB DDR4, Realtek 8111 and Realtek Audio, M2 PCIe SSD Intel or Sata SSD. I tried both CPUs and also have another hackintosh(Asus B360 mainboard) working correctly with this 2 cpus. So no problems with UHD630 from this CoffeeLake-R. Whatever i do i get a kernel panic. Only booting with fake 0x12345678 i can boot in Catalina 10.15.2. Or with clover -igfxvesa parameter. I have tried every clover settings and DSDT patching. Also @Sihastru efi patching for 64MB and MAX setup with setup_var witch might be not required as in BIOS i can modify those settings. No CFG Lock in BIOS but with setup_var it was successful. Also Intel framebuffer patching from @headkaze and also Clover kext-patching posted above by @Sihastru
BTW - Fujistu G558 DVMT Prealoc address is 0x8E3 (64MB =0x02), DVMT Total Memory is 0x8E4 (MAX = 0x03) and CFG Lock is at 0x5C4 (Disabled = 0x00)
Any help is appreciated.
Thank you!
Last edited: