Contribute
Register

Catalina 10.15.7 Fenvi T919 BT not detected

Status
Not open for further replies.
Thanks mate. I did exactly that. I used inject all version 75 which is the latest one and created usbmap with hack tool with only 12 ports which includes my internal f_usb used for Bluetooth
I even downgraded my MacOS to 15.4 to see so i have ruled out is compatibility.

4 possibilities remains to be narrowed out.
- OpenCore 0.6.3 wrongly configured
- motherboard bios or it’s settings
- motherboard port
- card Bluetooth module
 
jabjabjab said:
Thanks mate. I did exactly that. I used inject all version 75 which is the latest one and created usbmap with hack tool with only 12 ports which includes my internal f_usb used for Bluetooth
I even downgraded my MacOS to 15.4 to see so i have ruled out is compatibility.

4 possibilities remains to be narrowed out.
- OpenCore 0.6.3 wrongly configured
- motherboard bios or it’s settings
- motherboard port
- card Bluetooth module
Click to expand...
With your Z390 Designare you don't need the newer kext version, not that it should make a difference. If it just stopped working and you have ruled out software and properly configured USB then its sounds like a hardware problem. The other way to rule that out if its hardware related is by checking it with Windows or Linux installed.
 
garret2k2 said:
Gave up and installed Windows 10.
Click to expand...
Oh wait , so does the card's bluetooth module work on windows ?

I tried it on Linux and the same thing happened. Wifi workd but bluetooth didn't work, so it means either the F_USB hub is ****ed up, or it is the bluetooth module of fenvi.
 
I got a new fenvi card and everything is working fine now.
 
Last edited:
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top