- Joined
- Jan 16, 2020
- Messages
- 18
- Motherboard
- Gigabyte Z390 AORUS Ultra
- CPU
- i7-8700K
- Graphics
- Pro W5700
Hi there,
I'm working on a clean Catalina build using the following:
After two nights of fiddling I have suffered through countless failed installation attempts ending in things like:
Rather than detail the ways in which my attempts have failed I'm hoping someone can help advise on whether or not this hardware should be compatible and what a good path forward would be if so. I'm using the Catalina Guide and I've tried upgrading the Lilu, WhateverGreen, AppleALC, and VirtualSMC kexts to their latest versions to no avail. The clean Unibeast 10.0.0 USB lands me on:
Thanks in advance!
I'm working on a clean Catalina build using the following:
- i7-8700k
- Gigabyte Z390 AORUS ULTRA
- Radeon Pro W5700
- Samsung 970 EVO Plus SSD 1TB - M.2 NVMe
After two nights of fiddling I have suffered through countless failed installation attempts ending in things like:
- Log output halts at "IOConsoleUsers: gIO ScreenLockState 3 ..."
- Log output disappears to a black screen / USB installer stops blinking
- Log output halts immediately at "Error allocating pages ..."
- Log output halts immediately at "AMF: No slide values are usable! ..."
Rather than detail the ways in which my attempts have failed I'm hoping someone can help advise on whether or not this hardware should be compatible and what a good path forward would be if so. I'm using the Catalina Guide and I've tried upgrading the Lilu, WhateverGreen, AppleALC, and VirtualSMC kexts to their latest versions to no avail. The clean Unibeast 10.0.0 USB lands me on:
- Log output halts immediately at "AMF: No slide values are usable! ..."
Thanks in advance!