Catalina 10.15.1 with Clover bootloader stuck on apple logo with process bar and mouse cursor(after -v )

[dongyue1992]

My laptop is asus adol13un,i5-8250u,uhd620,nvidia mx150 and Crucial 500G ssd.When I boot 10.15.1 using Clover bootloader r5098 with -v boot arg,it can runs codes until an apple logo.But it cannot shows the logon window and stuck on this apple logo with process bar and a mouse cursor.I injected my video card uhd620 using IntelGFX 0x59168086 and ig-platform-id 0x591B0000 and put FakePCIID.kext,FakePCIID_Intel_HD_Graphics.kext in EFI\CLOVER\kexts\Other folder.I guess it caused by dual GPU and tested SSDT-Disable-DGPU.aml,nv_disable=1 boot args,-wegnoegpu boot args(injected the newest version of Lilu.kext and WhateverGreen.kext) but nothing changed.My laptop cannot disable nvidia video card from bios.

 

[Feartech]

My laptop is asus adol13un,i5-8250u,uhd620,nvidia mx150 and Crucial 500G ssd.When I boot 10.15.1 using Clover bootloader r5098 with -v boot arg,it can runs codes until an apple logo.But it cannot shows the logon window and stuck on this apple logo with process bar and a mouse cursor.I injected my video card uhd620 using IntelGFX 0x59168086 and ig-platform-id 0x591B0000 and put FakePCIID.kext,FakePCIID_Intel_HD_Graphics.kext in EFI\CLOVER\kexts\Other folder.I guess it caused by dual GPU and tested SSDT-Disable-DGPU.aml,nv_disable=1 boot args,-wegnoegpu boot args(injected the newest version of Lilu.kext and WhateverGreen.kext) but nothing changed.My laptop cannot disable nvidia video card from bios.View attachment 434700

zip and upload your clover folder (not the entire efi)

 

[dongyue1992]

zip and upload your clover folder (not the entire efi)

 

[Feartech]

remove all FakePCIID's kexts from clover/kexts/other

 

[dongyue1992]

remove all FakePCIID's kexts from clover/kexts/other

I tried but nothing happened

 

[ananthujp]

Did you solve this? Same issue here.

 

[dongyue1992]

Did you solve this? Same issue here.

Yes.I Solved this problem with RehabMan's VoodooTSCSync.kext and this post #18.

<< Solved >> - Stuck at gray screen with cursor/mouse

Fixed by installing Rehabman's fork of VoodooTSCSync. *sigh* this took me way too long. Hi! My device hangs at a gray screen, with a movable mouse (and since it's an installer, there's legal text at the bottom). I've found numerous similar posts, most of which point to graphics. The actual...

www.tonymacx86.com

 

[ananthujp]

Thanks a lot