- Joined
- Apr 28, 2018
- Messages
- 40
- Motherboard
- GIGABYTE GA-Z270X-Ultra Gaming
- CPU
- i7-7700K
- Graphics
- GTX 1070 SC
- Mac
- Mobile Phone
Hi,
I'm using my Hackintosh since a few months and everything is well oiled. I was using a two monitors setup (24" HD and an old Dell monitor) and everything was working fine.
But I replaced the 24" with a 32" 4K UHD monitor recently and, since then, it seems I can't connect anymore my two monitors at the same time..
Here's my setup :
Anyone got a cue on that? I'm on OS X Sierra 10.12.6
Thanks in advance!
I'm using my Hackintosh since a few months and everything is well oiled. I was using a two monitors setup (24" HD and an old Dell monitor) and everything was working fine.
But I replaced the 24" with a 32" 4K UHD monitor recently and, since then, it seems I can't connect anymore my two monitors at the same time..
- When I start the computer with the two monitors connected to the GFX card, the computer doesn't startup. The 32" monitor tells me there's no signal and I can't open the Clover menu at startup.
- When I start the computer with only the 4K monitor, I can connect the second monitor but, after a little while, the main monitor starts to loose the signal. I then try a restart, but the computer doesn't start normally as when two of them are connected.
Here's my setup :
- GIGABYTE GA-Z270X-Ultra Gaming (rev. 1.0) LGA 1151 Intel Z270 HDMI SATA 6Gb/s USB 3.1 ATX Motherboards - Intel
- Intel Core i7-7700K Kaby Lake Quad-Core 4.2 GHz LGA 1151 91W BX80677I77700K Desktop Processor
- EVGA GeForce GTX 1070 SC GAMING ACX 3.0 Black Edition
- Gigabyte GC-ALPINE RIDGE Thunderbolt3 Certified PCI-E Expansion card Rev 1.0
- WD Black 512GB Performance SSD - M.2 2280 PCIe NVMe Solid State Drive - WDS512G1X0C as main SSD
- Ballistix Sport LT 64GB (16GBx4) DDR4 2400 MT/s (PC4-19200) DIMM 288-Pin - BLS2K16G4D240FSB
Anyone got a cue on that? I'm on OS X Sierra 10.12.6
Thanks in advance!
Attachments
Last edited: