Contribute
Register

Can't reach install Menu with Core i7-4770k/GA-Z87X-UD3H (Following Nov Guide to DOT)

Status
Not open for further replies.
Joined
May 28, 2013
Messages
15
Mac
Classic Mac
Mobile Phone
Stuck at IOBluetoohHCICController Error , i7-4770k/GA-Z87X-UD3H

Hello,

I'm following TonyMac December 2013 Guide to the Dot.

My config stands at Corei7-4770k , GA-Z87X-UD3H , 4 GB Ram , Internal Graphic card


I've updated the motherboard firmware to F7
I've made the following changes to BIOS .
Press F7, Loads Defaults - Yes
Under Peripherals > xHCI Mode, change it to AUTO
Under Peripherals > xHCI Hand-OFF, change it to ENABLED
Under Peripherals > EHCI Hand-OFF, Change it to Enabled

Under Peripherals > Initial Display Output -> IGFX since I'm not using any external graphics card

I made Maverick Installation using Unibeast as per the guide.

After restarting , I choose USB at the menu , apple symbol boots up and it hangs

I've tried booting with -x flag but still the same result.

I've tried booting with -v flag , and it stuck on
[IOBluetoohHCICController][start]--completed

Help?
 
Joined
Sep 23, 2012
Messages
1,017
Motherboard
GA-Z77-DS3H 16Gb
CPU
Intel 3570k
Graphics
Nvidia GTX 660
Mac
Classic Mac
Mobile Phone
  1. iOS
Its usually a graphics problem, as thats the next thing after blutooth. What video output are you using? VGA is not supported.
 
Joined
May 28, 2013
Messages
15
Mac
Classic Mac
Mobile Phone
Update #1

SO I plugged in to HDMI , now I'm getting a new "Missing bluetooth controller transport!" error as well.

Update #2

I've tried putting a Sapphire Radeon 6950 card , still the same error

Update #3

With Sapphire 6950 card , I've turned internal graphic card off in bios , tried grahpicsEnabler=on/off combination along with -x , -v commands , I'm still stuck at same stage.


Any help?
 
Status
Not open for further replies.
Top