Can't install, instant reboot after black screen on selecting 'USB'

[SilentEagle]

Hey there guys,
I've got an older computer here, that I wanted to hackintosh, specs:

Core i3 540
H55 PRO
4GB DDR3 1066Mhz RAM
Geforce 6200 LE (I Know, it's old) / Integrated Intel graphics.

On both the 6200 and Intel Graphics, it just reboots after a few seconds of black screen when trying to boot the Mavericks installer. When I use the -v flag, it will show loading all the files for a minute, and then a black screen and reboot.

When I tried Sierra/High Sierra/El Capitan, it showed the Apple logo for a few seconds and then rebooted. I hoped that using an older OS X version would yield a better result.

I've checked my bios for the settings, and it seems everything is OK. I just followed this guide:
https://www.tonymacx86.com/threads/...ricks-on-any-supported-intel-based-pc.112389/

And these guides for the 10.11+
https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/
https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.235474/

But with no luck.

All help is appreciated, thanks in advance
-Tristan

 

[Jamesbond007]

Hey there guys,
I've got an older computer here, that I wanted to hackintosh, specs:

Core i3 540
H55 PRO
4GB DDR3 1066Mhz RAM
Geforce 6200 LE (I Know, it's old) / Integrated Intel graphics.

On both the 6200 and Intel Graphics, it just reboots after a few seconds of black screen when trying to boot the Mavericks installer. When I use the -v flag, it will show loading all the files for a minute, and then a black screen and reboot.

When I tried Sierra/High Sierra/El Capitan, it showed the Apple logo for a few seconds and then rebooted. I hoped that using an older OS X version would yield a better result.

I've checked my bios for the settings, and it seems everything is OK. I just followed this guide:
https://www.tonymacx86.com/threads/...ricks-on-any-supported-intel-based-pc.112389/

And these guides for the 10.11+
https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/
https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.235474/

But with no luck.

All help is appreciated, thanks in advance
-Tristan

I think you will need another graphics card which is supported. Both the 6200 LE and the CPU graphics are not supported.

You can consider a cheap GT210 for your system.