- Joined
- Feb 7, 2012
- Messages
- 26
- Motherboard
- GA-Z68MA-D2H-B3 (rev. 1.3) with 16 Gb 1333Mhz DDR3
- CPU
- Sandy Bridge i5-2500K OC'd to 4.3 GhZ
- Graphics
- Gigabyte GTX 1050ti /w 4Gb vram
- Mobile Phone
Hi
I have had a very stable hackintosh system running on Intel i5-2500k CPU on a Z68 based Gigabyte motherboard for the last 4 years. Recently my board burned out, but since my CPU and 16Gb of DDR3 RAM was perfectly functional, decided not to go for a new 7th gen system, and just replaced the mobo with an Asus P8Q77 Business oriented board (options for 2nd/3rd gen hardware are severely limited) It has a UEFI BIOS, updated to the latest version.
My installation of OSX Sierra (10.12.4, system id iMac 13, 2) is on a SSD, which I connected, after turning on AHCI mode and enabling HPET it could not recognise the bootloader. I had taken a carbon cloner copy on an external Samsung T1 SSD, which on the old board was able to boot directly from USB3 , no such luck here. Windows 10 (on a separate SSD) boots up without incident.
Can anyone tell how do I get my clover bootloader to show up after POST and boot into Sierra
Thank you in advance for any assistance
I have had a very stable hackintosh system running on Intel i5-2500k CPU on a Z68 based Gigabyte motherboard for the last 4 years. Recently my board burned out, but since my CPU and 16Gb of DDR3 RAM was perfectly functional, decided not to go for a new 7th gen system, and just replaced the mobo with an Asus P8Q77 Business oriented board (options for 2nd/3rd gen hardware are severely limited) It has a UEFI BIOS, updated to the latest version.
My installation of OSX Sierra (10.12.4, system id iMac 13, 2) is on a SSD, which I connected, after turning on AHCI mode and enabling HPET it could not recognise the bootloader. I had taken a carbon cloner copy on an external Samsung T1 SSD, which on the old board was able to boot directly from USB3 , no such luck here. Windows 10 (on a separate SSD) boots up without incident.
Can anyone tell how do I get my clover bootloader to show up after POST and boot into Sierra
Thank you in advance for any assistance
Last edited: